Casio QV-300 (B) Service Manual & Parts List page 12

To disassemble the camera unit
Note: The camera unit must be replaced with whole unit when it is defective, because the precise adjustment
is required when the individual parts of the camera unit are replaced, and it can be done only at our
factory.
(Except for the replacing the outer case.)
1. Be sure to turn the lever to "TELE".
2. Remove the two screws.
3. Remove the cover of the camera unit at the
opposite side of the lever.
4. Unhook and remove the
lens and CCD unit from the
outer case as shown in the
picture.
Lever
Cover
Hook
— 10 —