Checking slope
4
If installation surface is tilted, the
washer will be shaken.
Horizontal setting
5
Lift up the front of the washer and
adjust level by turnings the adjustable
legs clockwise or using the adjusting
plate.
Lower
Raise
Confirming level
6
Place the washer to original position
and confirm the level.
Distance between drain hose
7
and the wall
Distance between drain hose and
the wall should be more than 10cm,
and the distance between the other
part and the wall should be more
than 2cm.
More than 2cm
5
More than 10cm
More than 2cm