Adjustment - LG WFT15D81E(H)P Service Manual

4-4. ADJUSTMENT

1) Brake lever adjustment
Shown as in the figure, untighten the adjustment screw
to keep clearance less than 1.9
tip and the brake lever. And turn on the lock nut then
paint it red.
CAUTION
Painting part is adjusted in factory, it does not
need adjusting.
Adjust the screw properly if the brake doesn't
work during spin.
2) Keeping clearance
Keep the clearance about 2.0 ~ 3.5 mm between brake
lever and P .V link as shown in the figure.
CAUTION
Clutch pulley must be turning to one side P .V
Link is pulling the brake Lever.
Clutch pulley must be turning to the left and the
right when P .V Linke does not pull the brake
Lever.
3) V-belt adjustment
Adjust the motor pulley by pushing the motor like arrow
, to make V-belt tension parallel when pushed at the
point of arrow .
CAUTION
When the V-belt is not properly adjusted, the
motor will not be running or the belt will be
slipping.
33
0.1mm between the