Installation Instructions - LG WFT15D81E(H)P Service Manual

2. INSTALLATION INSTRUCTIONS

2-1. HOW TO ADJUST LEVEL
Installation area
1
Install the washer on flat and firm
surface.
Turn the adjustable legs to set the washer
horizontal(2EA).
Improper installation of the washer may cause noise and malfunctioning.
1. The ventilating openings in the base area must not be obstructed be
2. Install the washing machine on a level and firm surface, any tilt should be
Lower
Raise
carpeting when the washing machine is installed on a carpeted floor.
less than 1° .
Set rear legs
2
Remove the level and tilt the washer
forward (pivot on front legs) about 4 to
6 inches and gently lower the rear
legs back onto the floor. This action
will set rear leg adjustments to
correspond to front settings
Checking level
3
Open the lid, and check if the
washer is correctly leveled by
looking down from the top.
How to use the adjusting plates
Use the adjusting plates to level the washer
when the adjustable legs cannot cover the gap.
4