If The Refrigerator Can Not Pass Through A Door During Installaion, Follow These Steps - Daewoo FRS-T30H series User Manual Manual

If the refrigerator can
not pass through a door
during installation, follow
these steps.
Removing Refrigerator Door
* The freezer door will be removed in the same way.
1
Unscrew top hinge cover with a screwdriver. Insert a
thin screwdriver into the side groove of the cover to
remove.
2
Turn top hinge fastener counterclockwise 3~4 times.
Disconnect harness wires (model dependent).
3
Lift up the front of hinge to remove. (After the hinge
is removed the door can fall down forward. Be
careful!)
4
Lift the upper refrigerator door straight up to remove.
14
AD8082-16(영).indd 14
5
Disassemble two bolts that fixed the middle hinge
using hexagon wrench, spin to the direction of arrow.
After this operation separate the middle hinge.
6
Lift the lower refrigerator door straight up to remove.
2015-04-30 오전 11:32:25