Chapter 3 Identifying External Components - Mercury S108M User Manual

3） Ensure adequate ventilation space around the switch for
dissipating heat and air.
NOTE:
Please avoid any heavy thing placed on the switch.
2.2
Power On
Powering on the Switch, it will automatically initialize and its LED
indicators will respond as follows:
1） All of the Link/Act LED indicators will flash momentarily,
which represent a resetting of the system.
2） The Power LED indicator will light all the time.
NOTE:
If the LED indicators don't respond as described above,
please check the power supply and its connection.
Chapter 3
This Chapter describes the front panel, rear panel and LED
indicators of the Switch.
3.1
Front Panel
The Switch's LEDs are located on the front panel:
Identifying External Components
Figure 3-1 S105M Front Panel
Figure 3-2 S108M Front Panel
3