Chapter 2 Installation - Mercury S108M User Manual

The S105M/S108M Fast Ethernet Switch provides you with a
low-cost, easy-to-use,
standard upgrade to improve your old network to a 100Mbps
network. It will boost your network performance up to full duplex
data transfer. Its wire-speed switching that forwards packets can
be as fast as the speed that your network delivers those packets
to them.
1.2 Convention
The Switch or S105M/S108M mentioned in this User Guide
stands for S105M/S108M 5-port/8-port Fast Ethernet Switch
without any explanation.
1.3 Features
Complies with IEEE 802.3, IEEE 802.3u standards
5/8 10/100Mbps Auto-Negotiation RJ45 ports supporting
Auto-MDI/MDIX
Supports IEEE802.3x flow control for Full Duplex mode and
backpressure for Half Duplex mode
Supports MAC address auto-learning and auto-aging
LED indicators for monitoring power, link, activity
Plastic case, desktop or wall-mounting design
External Power Adapter supply
Chapter 2
2.1
Mounting the Switch on a Desk
To install the Switch, please follow the steps:
1） You can place the Switch on a flat desk.
2） Please inspect the Power Adapter carefully and make sure
that it is properly connected to a power source.
high-performance,
Installation
2
seamless and