General Information On Recording; Preparation For Recording; One Touch Recording - Philips MC-70 Manual

Note:
– During rewinding or fast forwarding of a tape, it
is also possible to select another source (CD,
TUNER or AUX, for example).
General Information on
Recording
G For recording, use only tape of IEC type I
(normal tape) or IEC type II (Cr0
G The recording level is set automatically, regardless
of the position of the Volume, Incredible
Surround, BASS/TREBLE, and so forth.
G The tape is secured at both ends with leader
tape. At the beginning and end of the tape,
nothing will be recorded for six to seven
seconds.
G To prevent accidental recording, break out the
tab on the left shoulder of the tape side you
want to protect.
G If "CHECK TAPE" is displayed, the protection
tab has been broken. Put a piece of clear
adhesive tape over the opening. Do not cover
the Cr0 tape detection hole when covering the
2
tab opening.
pg 001-029/MC50-70/22-Eng
Tape Operation/Recording
IMPORTANT!
Recording is permissible if copyright or
other rights of third parties are not
infringed upon.

Preparation for Recording

1
Press TAPE to select tape mode.
2
Load a recordable tape into the tape deck.
3
Press í or ë to select the recording tape side.
).
2
➜ A appears on the display for the reverse
side.
➜ B appears on the display for the forward
side.
4
Press AUTO REV. on the remote control
repeatedly to select a recording mode.
➜ å for recording on one side only.
➜ ∂ ∂ for recording on both sides. ∂ ∂
∂
5
Prepare the source to be recorded.
CD 1•2•3 – load the disc(s).
TUNER – tune to the desired radio station.
AUX – connect external equipment.
When recording is in progress
➜
G It is not possible to change tape side.
G It is not possible to listen to another source.
G It is not possible to activate the timer function.

One Touch Recording

1
Press CD 1•2•3, TUNER or AUX to select the
source.
2
Start playback of the selected source.
Press 0 REC to start recording.
3
To stop recording
G Press Çon the system.
Note:
– One Touch Recording is not possible in TAPE
mode, "SELECT SOURCE" will be displayed.
23
starts flashing.
3139 115 20742
3/7/01, 2:23 PM
23