Table of Contents
Advertisement
Before installing DAS-3224/3248, the following safety instructions must be complied.
All installation, repair or replacement procedures must be performed by qualified service
1.
personnel.
Before attempting to operate or repair this product, make sure the DAS-3224/3248 is properly
2.
grounded.
The maximum recommended operating temperature for the DAS-3224/3248 is 65ºC.
3.
Care must be taken to allow sufficient air circulation.
The connections and equipment that supply power to the DAS-3224/3248 should be capable
4.
of operating safely within the maximum power requirements of the DAS-3224/3248.
If the input DC voltage is more than 10% lower than the standard the DAS-3224/3248 may
malfunction. Make sure that the power supply is stable and the voltage is correct.
Do not allow anything to rest on the power cord, and do not locate the product where the
5.
power cord can be stepped on. Do not touch exposed connections, components or wiring
when power is present.
To reduce the risk of fire or any other malfunction and damages to the DAS-3224/3248, use
6.
the cables and power adapter provided in the package.
Following installation and the final configuration, the product must comply with the applicable
7.
safety standards and regulatory requirements of the country in which it is installed. If
necessary, request technical support.
Do not operate this product with panels removed or with suspected failure or damage to
8.
electrical components.
DAS-3224/3248 is not water-proofed. Never place or install the product in a wet location
9.
unless specially designed waterproof protection is present.
We will not be responsible for any damages or injuries to the DAS-3224/3248, environment, or
operating personnel if any of the safety instructions described above are violated or operating the
device in the non-recommended conditions.
WARNING INSTRUCTIONS
WARNING INSTRUCTIONS
5
Advertisement
Table of Contents
