Table of Contents
Advertisement
• Suitable for indoor or outdoor mounting
• Compatible with GSM/CDMA/3G/4G/WLAN/
WiMAX/AWS/LTE systems
• Full-band (698-2700MHz) broadband fre-
quency range
• N female connector
• Low VSWR
1.3 - How It Works
To get the strongest signal possible, it is very
important to set up the Accelerator Kit properly.
The antenna must be mounted in such a way that
it is able to pick up the best possible cell signal on
the outside of the building. Mount the antenna as
high as possible facing the cell tower in an area
with the best possible signal coverage.
AUTHORED BY ANTHONY HERNANDEZ (415)786-2081 - anthony94122@outlook.com
Cellular signal loss usually occurs for any one or a
combination of the following reasons:
• The nearest cell tower may be too far away to
provide a reliable signal in your area.
• Obstructions such as trees, buildings, hills,
weather, etc. can also cause signal loss even
when you are close to a cell tower.
• Building structures can cause signal loss, espe-
cially in buildings with metal, concrete, or
stucco walls.
The Accelerator Kit works by receiving the cellular
signal from the tower, relaying that signal through
the included cables to your 4G cellular data card,
and returning the signal from the data card to the
tower. This eliminates the signal loss caused by
the building and low-lying obstacles such as trees.
Copyright 2011 Cellphone-Mate, Inc. All rights reserved.
CHAPTER 1: Introduction
3
Advertisement
Table of Contents
