Table of Contents
Advertisement
This chapter describes how to plan
your Accelerator Kit installation and
how to install the antenna for best
results.
3.1 - Selecting the Location
The CM288-W antenna included with your 4G LTE
Accelerator Kit is designed to connect to a 4G cel-
lular data card via one or both of the included
CM240 20-foot cables. The CM240 cables run
from the antenna and into the building to connect
to the 4G adapter cable that in turn connects to
the data card.
AUTHORED BY ANTHONY HERNANDEZ (415)786-2081 - anthony94122@outlook.com
CHAPTER 3: Installation
In general, you will want to select an exterior loca-
tion on a wall or fence as close to the roof of the
building as possible to mount the antenna for best
results; however, you may mount the antenna in
any convenient location provided the signal is
good in that location.
Note: The illustration on page 14 shows
an installation near the building roof
line; you may mount the antenna in any
convenient location with a strong signal.
The mounting location should be located on the
side of the building with the strongest signal
reception whenever possible. You may locate the
antenna 20 to 40 feet from where you will con-
nect it to the data card. Be sure to account for
Copyright 2011 Cellphone-Mate, Inc. All rights reserved.
9
Advertisement
Table of Contents
