Receiving Bluetooth Intercom Calls; Holding A Mobile/Bluetooth Intercom Conference Call - Scalarider FREECOM 4 Manual

To start a Bluetooth intercom 4-Way call, do one of the following:
Cardo recommends the following pairing configuration for Bluetooth intercom 4-way calls:
Passenger 2 is paired to rider 1 on Channel A, and to passenger 4 on Channel B.
●
Passenger 4 is paired to rider 3 on Channel A, and to passenger 2 on Channel B.
●
To use the unit buttons :
●
a. Passenger 2 presses
b. Passenger 4 taps
To use the SmartSet app:
●
a. On the INTERCOM screen, passenger 2 selects Channels A+B. A Bluetooth intercom 3-way call with rider 1
and passenger 4 starts.
b. On the INTERCOM screen, passenger 4 selects Channel A. Rider 3 is added to the Bluetooth intercom call.
To end a Bluetooth intercom call, do one of the following:
To use the unit buttons:
●
To disconnect rider A, tap
●
To disconnect rider B, tap
●
To disconnect rider C, tap
●
To end all active Bluetooth intercom connections, press
●
If you initiated the Bluetooth intercom call using VOX: remain silent for at least 30 seconds. Any open call is
●
disconnected.

5.2.3 RECEIVING BLUETOOTH INTERCOM CALLS

If another paired unit calls you via Bluetooth intercom, the call begins instantly.
●
To receive Bluetooth intercom calls from unpaired units, see
●

5.2.4 HOLDING A MOBILE/BLUETOOTH INTERCOM CONFERENCE CALL

You can hold a conference call between a mobile call and Bluetooth intercom (single channel) call.
To add a Bluetooth intercom call to the current mobile call:
To use the unit buttons:
●
for 2 seconds. A Bluetooth intercom 3-way call with rider 1 and passenger 4 starts.
. Rider 3 is added to the Bluetooth intercom call.
.
twice.
three times.
for 2 seconds.
Click-To-Link Calls on page 29.
28