Pairing The Bluetooth Intercom To Non-Cardo Units - Scalarider FREECOM 4 Manual

5. The unit confirms that pairing has succeeded and the LED flashes purple for 2 seconds.
To cancel the pairing process, press
●
If pairing is not completed within 2 minutes, the unit automatically returns to Standby.
●
To reset all Bluetooth intercom pairing while in Bluetooth intercom pairing mode:
●
Press and
●
reset .
To pair your FREECOM 4 with Cardo units through the SmartSet app:
1. Confirm your unit is in Standby mode (LED flashes slowly).
1. Open the SmartSet app and tap
2. Tap Bluetooth.
3. Under Riders, tap Add (or Change if you are changing to whom the channel is paired) for the required channel
and follow the on screen menus.
4. On the other Cardo unit, activate Bluetooth intercom mode (see the other Cardo unit user manual at
cardosystems.com/product-manuals/).
5. The unit confirms that pairing has succeeded and the LED flashes purple for 2 seconds.
To reset all Bluetooth intercom pairing, tap Delete all.
●
To pair your FREECOM 4 with Cardo units through the voice-assisted menu:
1. Confirm your unit is in Standby mode (LED flashes slowly).
2. Tap and .
3. When the voice-assisted menu reaches "Advanced Features", tap
4. When the voice-assisted menu reaches your required option ("Pair Intercom A", "Pair Intercom B", or "Pair
Intercom C"), tap
5. On the other Cardo unit, activate Bluetooth intercom pairing mode (see the other Cardo unit user manual at
cardosystems.com/product-manuals/).
6. The unit confirms that pairing has succeeded and the LED flashes purple for 2 seconds.
To reset all Bluetooth intercom pairing, select the menu option "Reset Intercom Channels Pairing".
●

3.6.3 PAIRING THE BLUETOOTH INTERCOM TO NON-CARDO UNITS

The Cardo gateway enables Cardo units to connect to non-Cardo units over Bluetooth.
To pair your FREECOM 4 with non-Cardo units through the unit buttons:
1. Confirm your unit is in Standby mode (LED flashes slowly).
2. On your unit, press
3. Select the Bluetooth intercom channel you would like to pair:
Channel A - do not tap anything (default channel).
●
for 2 seconds. The LED stops flashing.
for 2 seconds. The LED flashes purple 5 times slowly, confirming that pairing has been
.
or use VOX.
for 5 seconds. The LED flashes red.
or use VOX.
10