Scalarider FREECOM 4 Manual page 11

Channel B - tap
●
Channel C - tap
●
4. Tap to activate the Cardo gateway. The LED flashes red and blue.
5. On the non-Cardo unit, activate Bluetooth mobile pairing mode (see the non-Cardo unit user manual).
6. The unit confirms that pairing has succeeded and the LED flashes purple for 2 seconds.
To cancel the pairing process, press
●
If pairing is not completed within 2 minutes, the unit automatically returns to Standby.
●
To reset all Bluetooth intercom pairing while in Bluetooth intercom pairing mode:
●
Press and
●
reset .
To pair your FREECOM 4 with non-Cardo units through the SmartSet app:
1. Confirm your unit is in Standby mode (LED flashes slowly).
2. Open the SmartSet app and tap
3. Tap Bluetooth.
4. Under Riders, tap Add (or Change if you are changing to whom the channel is paired) for the required channel
and follow the on screen menus.
5. On the non-Cardo unit, activate Bluetooth mobile pairing mode (see the non-Cardo unit user manual).
6. The unit confirms that pairing has succeeded and the LED flashes purple for 2 seconds.
To reset all Bluetooth intercom pairing, tap Delete all.
●
To pair your FREECOM 4 with non-Cardo units through the voice-assisted menu:
When using voice-assisted menus, the unit automatically pairs through Channel B.
●
1. Confirm your unit is in Standby mode (LED flashes slowly).
2. Tap and .
3. When the voice-assisted menu reaches "Advanced Features", tap
4. When the voice-assisted menu reaches "Pair Cardo Gateway", tap
5. On the non-Cardo unit, activate Bluetooth mobile pairing mode (see the non-Cardo unit user manual).
6. The unit confirms that pairing has succeeded and the LED flashes purple for 2 seconds.
To reset all Bluetooth intercom pairing, select the menu option "Reset Intercom Channels Pairing".
●
twice. The LED flashes blue.
three times. The LED flashes purple.
for 2 seconds. The LED stops flashing.
for 2 seconds. The LED flashes purple 5 times slowly, confirming that pairing has been
.
or use VOX.
or use VOX.
11