Luxman E-250 Owner's Manual page 9

11. Signal ground terminal (SIGNAL GROUND)
Is a ground terminal for devices to be connected to this unit.
These terminals are used to reduce noises when other de-
vices are connected, and are connected to an analog player
or a tone arm. This terminal is not designed for safety.
12. Input terminals (INPUTS)
Are input terminals to connect pin-plug cables from an ana-
log player or a tone arm. There are 2 lines of input terminals
to connecte 2 pieces of analog players or tone arms. The
input selector can select between 1 and 2.
P H O N O A M P L I F I E R E - 2 5 0
13. Output terminals (OUTPUT)
Use pin-plug cables to connect the output terminals of this
product with the line input terminals of a control amplifier
and an integrated amplifier.
If this terminal is connected to the phono (PHONO) input
terminals of those amplifiers, they may be damaged. Be
sure to connect the terminal to the line input terminal.
14. AC inlet (AC IN)
Connects the accessory power cable.
The power shall be supplied from a household wall socket.
7