Luxman E-250 Owner's Manual page 7

6. Articulator indicator
Blinks when the articulator is activated.
7. Input selector (INPUT)
Selects an input terminal on the rear panel.
• 1: Input terminal 1 (INPUT-1) is selected.
• 2: Input terminal 2 (INPUT-2) is selected.
8. Cartridge selection switch (CARTRIDGE)
Selects between MM and MC according to your cartridge.
When MC is selected, the MC cartridge selector (9) can
switch between HIGH and LOW and the MC input imped-
ance.
P H O N O A M P L I F I E R E - 2 5 0
9. MC cartridge selector
When the cartridge selector (8) is set to MC, the MC car-
tridge selector can select an input impedance.
This selector switches between HIGH and LOW according
to your MC cartridge. The input impedance at the MC HIGH
position is 40 Ω, and the input impedance at the MC LOW
position is 2.5 Ω.
5