Setting The Clock - Philips HSB3280 Quick Start Manual

Setting the clock

IMPORTANT!
– To set clock in the Eco Power Standby mode, fi rst press and hold 2 for more than 2
seconds to switch to the standby mode.
1
In standby mode, press and hold
2
When the hour digits fl ash, press
3
SET TIME/PRO.
Press
4
When the minute digits fl ash, press
5
SET TIME/PRO
Press again to confi rm the time setting.
Program remote control
1
Place the smart remote control (A) within 1mm-10mm distance from the other remote control
(B).
2
LEARN
Press for 2 seconds to activate the learning mode.
A blue indicator on the smart remote control (A) lights up.
➜
3
Press the button on the other remote control (B) that is to be stored on the smart remote
control (A).
If the code is received successfully, the blue indicator fl ashes.
➜
4
Press one of the 12 white learning buttons on the smart remote control (A) to store the code
of this button.
If the code is stored successfully, the indicator fl ashes green for 2 seconds, then turns blue
➜
again.
5
Repeat steps 3 and 4 to program more buttons on the smart remote control (A).
6
LEARN
Press to exit the learning mode.
SET TIME/PRO.
VOL +/-
to set the hours.
VOL +/- to set the minutes.
Notes:
– If there is no operation within
8 seconds, the systme quits the
learning mode automatically
and the indicator turns off.
– During the learning process,
the normal remote control
functions are disabled.
– By default, the remote control
codes of a Philips TV are stored
in the smart remote control.
The available preset buttons
are POWER, AV, CH ,
3 4
MUTE and SLEEP.
VOL ,
3 4