General Information On Recording; Preparation For Recording; One Touch Recording/Recording The Mixed Sound; Cd/Vcd/Mp3-Cd Synchro Recording - Philips FWV780 User Manual

Tape Operation/Recording
General Information on
Recording
G If you do not intend to record via the
microphone, unplug the microphone to avoid
accidental mixing with other recording source.
G For recording, use only tape of IEC type I
(normal tape).
G The recording level is set automatically, regardless
of the position of the Volume, VAC, DSC and so
forth.
G The tape is secured at both ends with leader
tape. At the beginning and end of the tape,
nothing will be recorded for six to seven
seconds.
G To prevent accidental recording, break out the
tab on the left shoulder of the tape side you
want to protect.
G If "CHECK TAPE" is displayed, the protection
tab has been broken. Put a piece of clear
adhesive tape over the opening.
IMPORTANT!
– Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
– Recording is possible only on tape deck 2.
26
pg 001-032/V780&785/21-Eng

Preparation for Recording

1
Press TAPE (TAPE 1•2) to select TAPE 2.
2
Load a recordable tape into tape deck 2 with full
spool to the left.
3
Prepare the source to be recorded.
VCD – load the disc(s).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 1 with the full spool to the left.
AUX – connect external equipment.
When recording is in progress
➜
G It is not possible to listen to another sources
except when dubbing tapes.
G It is not possible to activate the timer function.
One Touch Recording/Recording
the mixed sound
1
Press VCD, TUNER or AUX to select the
source.
G You can connect a microphone to record the
mixed sound in tape deck 2 (refer to "Karaoke -
Microphone Mixing").
2
Start playback of the selected source.
3
Press REC to start recording.
To stop recording
G Press Ç on the system.
Note:
– One Touch Recording is not possible in TAPE
mode, "SELECT SOURCE" will be displayed.
CD/VCD/MP3-CD Synchro
Recording
1
Press VCD to select the disc.
G Press í or ë to select the desired track to
start recording.
G You can programme the tracks in the order you
want them to be recorded (refer to "CD/VCD/
MP3-CD Operation - Programming the disc
tracks").
2
Press REC to start recording.
➜ The disc will start playback automatically.
26
starts flashing.
3139 115 21143
12/11/01, 5:15 PM