Table of Contents
Advertisement
Positioning
•
Place the speaker so the front face is slightly forward of any large object that
protrudes into the room – eg. a fireplace, bookcase or television.
See stereo set up diagram
Tip
Tip
•
Ensure that stereo pairs of loudspeakers are equidistant from the listening position.
•
It is best to position the front left/right pair (and centre channel loudspeaker if you
have a surround system) at the same height, usually at ear-level when seated at
the listening position.
If any of the speakers are mounted above or below ear level, then angle the
Tip
speaker towards the listening position.
Tip
•
The distance between your left/right speakers and the listening position should
ideally be equal. As a general rule, the width of the audio picture will be narrow
if the speakers are too close together. If they are too far apart the picture will be
wide but there will be less central definition.
Use a well recorded vocal track to judge the ideal spot.
Tip
Tip
•
To enhance the audio picture/soundstage and sound balance, the speakers can
be angled/toed-in. With the speakers facing straight ahead play a well recorded
vocal track. Gradually toe-in both speakers by small increments (max 5° at a time)
(see stereo set-up diagram) until the voice is vivid and centrally placed. You can
ensure this is best position by going 'one step too far' then returning. Then, use
a track with extended high frequencies such as cymbals, check that they sound
clear but not overpowering. If they sound too loud or harsh subtly toe the speakers
out by very small increments until you achieve the ideal balance; then repeat
both listening tests to confirm.
A simple, well-recorded band with vivid vocals will help to find the best position.
Tip
Tip
Hide quick links:
Advertisement
Table of Contents
