Main Beam Headlamps - McLaren SUPER SERIES Owner's Handbook Manual

Hide thumbs Also See for SUPER SERIES:
Table of Contents

Advertisement

BEFORE YOU DRIVE
LIGHTING
Sidelamps
The sidelamps and the daytime running
lamps are a combined series of Light Emitting
Diodes (LEDs) located around the outside of
the headlamp. The sidelamps operate at a
lower intensity than the daytime running
lamps, see Daytime running lamps, page 1.53.
The sidelamps, tail lamps and licence plate
lamps illuminate when the light switch is
turned to position (1).
The sidelamps warning light in the
instrument cluster illuminates.
Dipped beam headlamps
To switch on the headlamps, turn the light
switch to (2).
The headlamps warning light in the
instrument cluster illuminates.
NOTE: On your McLaren, the same
headlight dipped beam setting applies
for driving on either the left-hand or
right-hand side of the road.
1.52

Main beam headlamps

To switch to main beams, push the stalk away
from you.
The main beam headlamps warning
light illuminates in the instrument
cluster.
Pull the stalk towards you, to revert to dipped
beams.
Headlamp flash
Pull the stalk fully towards you.
The main beam headlamps operate for as
long as the stalk is held.
The main beam headlamps warning
light illuminates in the instrument
cluster.

Advertisement

Table of Contents
loading

Table of Contents