Connecting To Tv With Composite(Av) Cable - Iamm NTD36HD User Manual

After power off NTD36HD and TV, connect them like below procedure..
•
The Composite AV cable is needed to connect with normal TV or Video and is for connecting
Composite video signal and 2CH audio signal simultaneously.
•
Connect yellow cable to the Composite connector of NTD36HD and to the VIDEO connector of
TV set.
•
Connect red cable to the FRONT-R connector of NTD36HD and to the Sound Input(Right) of
TV or Audio system.
•
Connect white cable to the FRONT-L connector of NTD36HD and to the Sound Input(Left) of
TV or Audio system.
•
You may refer to cable colors and connector colors.
•
Please do not misunderstand Composite connectors and Component(Y, Pb, Pr) connector
which is located on the bottom line of NTD36HD rear side.
•
If you want to use digital audio output(Optical, Coaxial), you don't need to connect with red
cable and white cable.
•
In case that your TV set has S-Video input connector, you may enjoy higher display quality by
connecting with S-Video cable.(note : As we do not supply S-Video cable, you need to
purchase it by yourself from shop)
•
For more information, refer to user's manual supplied by TV maker

Connecting to TV with Composite(AV) cable

19