Preparation To Use Ntd36Hd; Procedure; Kinds Of Hdd To Be Installed - Iamm NTD36HD User Manual

Preparation to use NTD36HD

To introduce preparation before you enjoy NTD36HD.
1. Check whether all accessories are supplied properly.
2. Install HDD(Hard Disk Drive) into NTD36HD according to the procedure of HDD
installation(※ note : HDD jumper should be set as Master)
3. Connect AC adapter into NTD36HD, and connect NTD36HD with PC through USB
cable
4. Power on NTD36HD(with power button of top side, or with power button of remote
controller)
5. In case that the installed HDD is not formatted, please format it first according to
normal HDD format procedure
6. Copy media files in your PC to the HDD of NTD36HD
7. After finishing copying files, disconnect NTD36HD from your PC system
8. Connect NTD36HD to TV set and(or) to audio system
9. Power on NTD36HD and change set-up value in SET-UP menu if needed. It is
recommended that NTD36HD should be rebooted if you set up Network newly
10. Now, you are ready to enjoy NTD36HD freely
HDD Size
3.5" IDE HDD
※ NTD36HD does not support S-ATA Type

Procedure

Kinds of HDD to be installed

HDD Type
IDE 40 pin
HDD Capacity
Any capacity
available in Over 4200 RPM
market
14
HDD buffer
HDD RPM
Memory
Over 2M