3One data IES608-2F Hardware Installation Manual page 8

Switch Switch Settings: Settings:
Switch Switch Settings: Settings:
Provide 4 bit switch for function setting (ON is enable): 1(ISP) is
DOWNLOAD PROGRAM,2 is RESUME DEFAULT,3is SW-Ring
Enabled ,4 is blank (NC).When the switch is setup, must be restart.
DOWNLOAD
DOWNLOAD DOWNLOAD DOWNLOAD PROGRAM
IES608-2F series provide one DOWNLOAD PROGRAM port
(RJ45 type), on the top panel, manage the system with PC by
RJ45-DB9F adapter.
Installation Installation
Installation Installation：
Before installation, confirm that the work environment meet the
installation require, including the power needs and abundant space.
whether it is close to the connection equipment and other
equipments are prepared or not.
Installation Installation require require as as as as below require
Installation Installation require
1. Avoid in the sunshine, keep away from the heat fountainhead or
the area where in intense EMI.
2. Examine the cables and plugs that installation requirements.
3. Examine whether the cables be seemly or not (less than 100m)
according to reasonable scheme.
4. Screw, nut ,tool provide for yourself.
5.Power need: Redundant, dual 24VDC power inputs(12~36DC）
6. Environment: -40°C to 75°C
Storage Temperature: -45°C to 85°C
Relative humidity 10% to 95%
DIN-Rail DIN-Rail Installation Installation
DIN-Rail DIN-Rail Installation Installation
In order to use in industrial environments expediently, IES608-2F
PROGRAM
PROGRAM port PROGRAM
below below
below
YourSerial and Data Communications Expert
port port: : : :
port
Shenzhen 3onedata T echnologyCo.,Ltd