Table of Contents
Advertisement
Parts and Accessoires
Order NR.
Description
K1500HC
Set rubber ring (10x)
K1500GE
Set O-rings (5x) for BELLOMATIC electrode
K1500GF
250 ml KCI-solution (1 m.)
K1520VA
250 ml KCI-solution (3,3 m.)
K1500GG
250 ml KCI-solution (1 m.) thickend
K1520VN
250 ml KCI-solution, (3,3 m.) thickend
4.3. Mounting kit for refillable ref.
electrodes
This mounting kit replaces the standard
electrode mouting set so that elctrodes
of Yokogawa with a long glass shaft can
be fixed in the fitting or subassembly
(see fig. 4.2). This mounting kit may
be used as process pressure up to 3
bar. Higher pressure ratings require the
standard mounting set for electrodes with
DIN dimensions or, alternately a salt bridge
(see §4.5). The refillable electrodes can be
connected to a KCI-reservoir via a silicone
tubing (see fig. 4.2). The pressure on the
KCI-solution and consequently, the liquid
outlet can be increased by mounting the
reservoir above the fitting or subassembly.
This prevents penetration of the process
liquid into the electrode.
Note: The pressure on the KCI-solution
must exceed the liquid pressure.
In §7 you will find the spareparts
4.4. Cleaning systems
4.4.1. General
The standardised design of the fittings
and subassemblies makes it possible to
mount cleaning systems directly. The 4-hole
types are especially designed for these
applications.
Three different types of cleaning systems
are available:
- mechanical cleaning (electrically or
mechanically driven) (see fig. 4.3)
- chemical cleaning
Detailed specifications of the cleaning
systems are on seperate sheets
(see GS 12B6V1-E-E).
O-rings
(11 x 3
(K1500BZ)
Figure 4.2
brush cleaning
Figure 4.3
13
KCI-reservoire
(K1500FU)
Silicone tubing
(K1500GA)
)
chemical cleaning
Figure 4.4
IM 12B06K01-01E-E
Advertisement
Table of Contents
