Table of Contents
Advertisement
6.
Using the Headset
Press the On/Off Headset Handset button to put the system in headset mode.
The headset mode light on the top of the remote blinks and the In Use indicator
on the base station illuminates.
7.
Put the headset on and select a telephone compatibility setting until dial tone is
clear. If dial tone is clear for both A and G set to A.
8.
Remove the handset and make a call. While switching between the headset and
the handset, adjust the transmit (microphone) setting until your voice is the same
volume on both devices. (1 is softest, 8 is loudest)
9.
Use the remote to adjust the receive (speaker) volume. IF your telephone has
volume control, set it to mid-range.
10.
To roam up to 150 from the base, remove the remote from the base station and
clip it to your belt, pocket or shirt.
11
GN 9050 Beta User Manual
Advertisement
Table of Contents
