Using a microSD card
Tablet has a built-in microSD memory card reader. All brand mi-
croSD cards can be used with it. You might encounter problems
reading and writing data when using cards of unknown origin.
Inserting cards into the reader
To insert a microSD card, make sure that there is no other card
inside the tablet. The card should be placed face up (see the small
indentation on the card). Put it into the reader and press it down
until it clicks. Card inserts into reader completely. However, do not
use excessive force.
Removing the card from the reader
To remove the card from the reader, gently push the card inside –
you hear a click. Then release it. The card will pop from the reader.
After plugging in a microSD card, Android does not add any icon on
the desktop. Navigate to the microSD card from any application. If
there is no application defined default path for plugged in microSD
card it is necessary to look for it manually. To do this, go to the
root directory (usually labeled /) and enter the following path: /
mnt/sd-ext
The path (if possible) can be entered manually.
Caution!
Please note that the sdcard directory does not refer to microSD card contents, but
to the built-in memory. This terminology results from the architecture of Android.
User Manual | 33
Operating the device