Operating the device
OPERATING THE DEVICE
Charging
Plug in the original charger to the tablet connector. Push the plug
lightly until you feel some resistance. The plug pin needs not to be
inserted fully into the housing and should not be pressed tightly.
Pressing may damage the tablet connector.
If the tablet has a dedicated charger connection, charge it through
this connector. You can charge via USB, but it is an option for short-
term power supply and tablet should not be charged in this way
for more than five minutes.
We suggest that you do not use the tablet while charging. When
charging the static electricity may develop on the display matrix,
which in some cases make it difficult to use the capacitive touch
screen.
During simultaneous tablet operating and charging the power
outlet may be damaged by an accidental bending the plug.
When fully charged disconnect the charger from the tablet. Unplug
the charger from the mains to prevent unnecessary power con-
sumption.
Turning on your tablet
To turn on tablet completely switched off, hold down the Power
button for 5 seconds. This is to prevent accidental activation of the
tablet during transport.
If the tablet is switched on but is in the sleep mode, you only need
to press the Power button briefly. Tablet turns on in about one
second. Pressing the button twice makes the tablet turn on and
immediately enter sleep mode.
Turning off your tablet
If you are using the tablet regularly, we recommend to switch it
to sleep mode. In this way the tablet is always ready to work and
turns on within 1-2 seconds, while consuming very little power,
and can operate without recharging for several days. To switch
the tablet into sleep mode, press the Power button. The screen
turns off.
User Manual | 29