Table of Contents
Advertisement
Universal Developer Kit Contents
Your Universal Developer Kit (MTSMI-UDK) includes the following:
Developer Board
Power Supply
Cables
Antennas
Antenna Cables
Customer Notices
Additional
Attaching Power Supply Blades
Power Supply and Blades
Power Supply No Blades
To attach a power supply blade:
1.
Remove the power supply cover (not shown). To do this, slide the lock down and hold it while you lift off
the cover.
2.
Insert the latch on the blade into the notch on the power supply.
3.
Slide the lock down and hold it while you press the blade in place.
Universal Socket Developer Guide
One MTSMI-UDK Developer Board
One 100-240V 9V-1.7A power supply with removable blades
One US blade/plug
One EURO blade/plug
One UK blade/plug
One RS-232 DB9F-DB25M serial cable
One RJ-11 phone cable
One RJ-45 Ethernet cable
One USB cable
Two hepta band antenna for cellular modems
One 2.4GHz, ½ WAVE antenna with reverse polarity for Bluetooth devices
One GPS antenna
One SMA-to-MMCX antenna cable for cellular antennas
Three SMA-to-UFL antenna cables one for select cellular antennas
One for GPS antennas
One RSMA-to-MMCX antenna cable for Bluetooth antennas
Modem activation notice
One promotional screwdriver
Power Supply with EU blade
Power Supply with NAM blade
CHAPTER 1 – EMBEDDED SOLUTIONS
Power Supply with UK blade
10
Advertisement
Table of Contents
