Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Calibre HQView620
Summary of Contents for Calibre HQView620
- Page 1 HQView600, HQUltra700 and LEDView700 Series Operating Instructions...
- Page 2 Calibre UK Ltd ("Calibre"). Failure to comply with this condition may result in prosecution.
-
Page 3: Revision Table
1.15.1 Modified menus in the Basic Switcher Setup section 13-Jan-2017 Added HDMI 8-bit,10-bit & 12-bit © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... -
Page 4: Table Of Contents
Serial Connector pinout and RS-232 Configuration Settings ..........25 5. UNIT CONTROL ........................... 26 6. FRONT PANEL CONTROL ......................26 ............................27 NPUT © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017... - Page 5 DVI Colour Space and DVI Range ........................40 6.2.3.4 DVI Range ..............................40 6.2.4 Video Wall .......................... 41 6.2.4.1 Auto Zoom ..............................41 © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926...
- Page 6 ....................61 USTOM ATTERNS 8. FIRMWARE UPDATE ........................62 ..........................62 UPDATE ......................... 62 ROWSER UPDATE © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926...
-
Page 7: Table Of Figures
Table 6: Supported Video Formats ......................24 Table 7: Serial Connector Pinout ......................25 Table 8: RS-232 communication settings ....................25 Table 9: I/O Lock behaviour ........................38 © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614... -
Page 8: Safety Warnings
PERSONNEL. ALWAYS DISCONNECT THE POWER CABLE FROM THE MAINS OUTLET BEFORE ANY COVER IS REMOVED. THIS EQUIPMENT CONTAINS NO USER SERVICEABLE PARTS. REFER ALL SERVICING AND MAINTENANCE TO QUALIFIED SERVICE PERSONNEL. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614... -
Page 9: Introduction
The Video Wall feature allows multiple units to work synchronously and be part of a large matrix configuration, up-to 4x4. Each unit automatically crops a section of the input video image and displays it on the corresponding projector or screen. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... - Page 10 Each unit includes a 30W stereo audio power amplifier allowing direct connection to loudspeakers. Separate line level outputs are also provided for connecting to external amplifier systems. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com...
-
Page 11: Table 1: Table Of Models
Basic Configuration: Inputs: 2xHDMI 4K 1xHDMI HD 1xDisplayPort 4K 1xVGA 1xCVBS 1xDVI-U Outputs: 1xHDMI 4K 1xDVI/HDMI © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... -
Page 12: Packing List
Packing List supplied with the following: All models are 1) 3 pin plug IEC mains cable 2) CD (w/ documentation) 3) Quick Start Guide (QSG) -
Page 13: Basic Switcher Set-Up
If applicable, also connect any audio sources to the 3.5mm stereo jacks. Insert the power cord and power-up the unit. The boot-up process takes about one minute. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... - Page 14 Except for LED applications, verify that the Test pattern with the border outline is shown on the display Frame Rates © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017...
- Page 15 Out:2560x1600p 30.00 HMDI-1, the output is set to 2560@30 and the unit is free Free Run running. (no Genlock or I/O lock) © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017...
-
Page 16: System Description
7 - Jog wheel: The wheel is used for navigating through the menu system and making value changes. The jog wheel has a push function the creates the same effect as pushing the Menu/Sel key. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... -
Page 17: Table 2: Front Panel Button Overview
Esc + YPbPr (in live operation or at power up) Set output mode to 720p: Esc + VGA Firmware version: Standby + Esc (to exit, press the menu button) © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017... -
Page 18: Rear Panel Layout
18 - 2x Mic Inputs 19 - 8x Analog audio inputs 20 - Stereo Speaker Outputs 21 - Stereo Line Outputs © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017... -
Page 19: Table 3: Input Video Connector Overview
Models with “A” Suffix are fitted with Analog audio Models with “SV" suffix are fitted with Streaming Video Input Models with “ASV” suffix are fitted with Analog audio and Streaming video © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... -
Page 20: Product Specification
SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant, accepts 484i, 576i, 720, 1080i and 1080p single link formats at 270Mb, 1.485Gb or 2.97Gb rates. 4.2.4 Computer (SVGA) Inputs VESA formats © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614... -
Page 21: Hdmi & Dvi Inputs
3G-SDI Output Format: SD-SDI, HD-SDI and 3G-SDI YCbCr 4:2:2 serial digital component video Input impedance: 75 ohms. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... -
Page 22: Hdmi & Dvi Outputs
HDMI and SDI output signals. Also, the unit features a S/PDIF coaxial digital audio output connector for monitoring audio of the HDMI and SDI channel. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614... -
Page 23: Analog Audio
Audio models also include stereo audio power amplifier supporting 15W RMS loudspeaker per output and separate stereo balanced line level audio outputs for external amplifier systems. The analog stereo outputs are available on two phoenix connectors. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... -
Page 24: Video Formats
VIC=93 EIA/CEA-861-F 4096 2160 VIC=98 © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... -
Page 25: Communications Specification
115200 Bits/second Stop Bits Number of bits received/transmitted in the BYTE Parity Bits No Parity Flow Control © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... -
Page 26: Unit Control
For example, if you change the settings for the composite video channel, you will not affect the settings you may have made in the DVI channel. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... -
Page 27: Input
Default : HDMI-1 * : These inputs are not present on all the models. Please refer to the Input Connector Overview to determine the appropriate models. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614... -
Page 28: Input Config
CCS is a filter to reduce luminance to chrominance cross talk of composite video signals (only) which appears as a coarse rainbow pattern or random colours in regions of fine details. Default : On © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... -
Page 29: Digital Inputs
The unit can signal the source to match with © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... -
Page 30: Sdi Setup
Available Test Patterns: o Red Curtain o Green Curtain o Blue Curtain © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... -
Page 31: Test Pattern Tone
6 = red; 7 = blue; 8 = multicolour, sets the four quadrant colours as red, green, blue and black) Default: 8: (Multicolor) © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017... -
Page 32: Moving Cross Speed
Start, Stop, Auto Start and Auto reconnect. Settings: Source IP address & Port, File name, Start, Stop, Auto Start, Auto reconnect Default: Auto Start=On, Auto reconnect=Off © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... -
Page 33: Custom Modes
Adjusts the colour hue of NTSC signals. This is not applicable for computer input signals or formats. Settings: -50 to 50 in steps of 1 Default : 0 © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... -
Page 34: Rgb Values
Full Screen: The input image is scaled to completely fit the display area without preserving the aspect ratio of the source. This will cause distortion but no black areas will be visible. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... -
Page 35: Overscan
This cuts off unwanted features at the top or bottom from e.g. head switching in legacy video images. Settings: 0 to 10 in steps of 1 Default: 0 © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614... -
Page 36: Pan Tilt Zoom (Ptz)
HD. At setting 0 the filter is switched off, with setting 3 providing the highest effect. Settings: 0, 1, 2, 3 Default : 1 © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614... -
Page 37: Output
Valid combinations are 50Hz/50Hz, 59.94Hz/59.94H and 60Hz/60Hz. If genlock is not achieved, the output frame rate refresh rate is determined by the frame rate setting. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... -
Page 38: Frame Rate (Enable)
Settings: CMx Width: from 640 to 4096; CMx Height: from 480 to 2160; CMx Scan Type: Progressive/Interlaced Default : CMx Width: 1920; CMx Height: 1080; CMx Scan Type: Progressive © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... -
Page 39: Gamma/Colour/Crush
If too high a setting is chosen, image solarization may be observed where dark image areas turn completely black or even change colour. Settings: 0 to 255 in steps of 1 Default : © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614... -
Page 40: Output Config
- 8 Bit System: 0x10 .. 0xEF, 10 Bit System: 0x040 .. 0x03BF, 12 Bit System: 0x100 .. 0xEFF. Settings : Default, Limited, and Full Default : RGB & Full © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614... -
Page 41: Video Wall
In the example below a 4K image is split into four 1080p quadrants in a 2x2 configuration. Each unit is set for a 2x2 configuration and I/O lock. Hpos and Vpos setting are set as shown in the drawing. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... -
Page 42: Bezel Width
Hor Offset : The horizontal position within the total display space where the image will be place Ver Offset : The vertical position within the total display space where the image will be place © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... -
Page 43: Led Screen Size
Splicing Zoom should be turned off when the unit is connected to a multi-head graphics card where the content has been split. Settings: On/Off Default: Off © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614... -
Page 44: Splicing Width / Splicing Height
Standard mode works up to a wall size of 4x4. Advanced mode is limited to a maximum wall size of 2x2. Settings: Standard / Advanced Default : Standard © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614... -
Page 45: Figure 6: 2X1 Standard Led Screen Splicing Example
1320 1320 Top Edge Bottom Edge 1440 1440 Units Wide Units High Horiz. Pos Vert. Pos. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... -
Page 46: Advanced Splicing
Splicing Vert. Pos. ADVANCE SPLICING Wall Width 2640 2640 Wall Height 1440 1440 Hor Offset 1760 Ver Offset © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... -
Page 47: Figure 8: 3X1 Advanced Led Screen Splicing Example
Wall Width 2640 2640 2640 Wall Height 1440 1440 1440 Hor Offset 1320 2200 Ver Offset © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... -
Page 48: Figure 9: 1X2 Advanced Led Screen Splicing Example
Splicing Vert. Pos. ADVANCE SPLICING Wall Width 1200 1200 Wall Height 1350 1350 Hor Offset Ver Offset © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... -
Page 49: System
Settings: English (AE), English (BE), Deutsch Default: English (AE) 6.4.3.2 Keypad Lock Settings: Off, Menu Only, All Keys Default: Lock: Off © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... -
Page 50: Menu Time
Jog Push Enable Settings: On, Off Default: On 6.4.3.6 Web Colors Settings: Dark, Light Default: Dark © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... -
Page 51: Network Settings
This button allows users to restore all settings to the default values of the unit, allowing the unit to return to a known (good) system state. A confirmation is requested prior to actual system settings restore. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... -
Page 52: Audio
Input Level Input level adjusts the gain of the incoming audio signal Settings: -12 to +6 db Default : 0 db © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017... -
Page 53: Input Mode
For each of the analog video sources the user can select a Stereo Analog source or a Stereo analog source with the mics. The user can also selected which of the analog source will be assigned to the input. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... -
Page 54: Digital Inputs
+48V is sent to the condenser microphone via the XLR socket. 6.5.3.8 Audio Out Mute This menu allows users to mute audio output source individually. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614... -
Page 55: Status
(Deep Colour and HDCP support). The type of attached monitor (DVI or HDMI), video bit depth (8, 10 or 12 bit per colour channel) and HDCP encryption (on/off) is displayed. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... -
Page 56: Web Browser Control
System/Network Settings menu. Note: This tool is for use on a network and not on a single wire connection. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... -
Page 57: Web Page Menu Orientation
PV7 identifier followed by the MAC address. The firmware version number and information on the input mode are listed next. Under the information pane the available input channels are shown and can be activated directly. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... -
Page 58: Calibre Uk Limited - Issue 1.15
Values can be entered directly in the field beneath the slider. Click into the field, enter the new value through the PC keyboard and click with the left mouse button to any location outside the field to update to the new value. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... -
Page 59: Calibre Uk Limited - Issue 1.15
PC keyboard. The new name for the input channel can be entered. The new name is stored when clicking with the left mouse button to any location outside the field. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... -
Page 60: Software Update
To restore the unit’s settings, browse and select the file on your PC. The selected file will be shown in the field left to the Browse button. Now press the restore button. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... -
Page 61: Logo & Custom Test Patterns
From the same menu you can select up-to four images and download them as custom test patterns. These images will appear as Custom1,2,3 or 4 in the Test pattern menu © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... -
Page 62: Firmware Update
The Status menu indicates the detected source, Output resolution and I/O lock state. Web Browser update To update via the web server, please follow the steps outlined previously in the web browser control chapter. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614... -
Page 63: System Restore From An Image File
Hit the Menu Sel button to exit to the Status menu Next, follow either of the methods described earlier in this chapter to update the unit to the latest software release. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... -
Page 64: Environmental And Emc
(mains earth) to the metal chassis. DO NOT CONNECT to the connectors of the rear panel (signal earth), because you may damage the unit beyond repair. © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com... -
Page 65: Appendix A: Front Panel Menu Tree Structure
Input Output LED Screen Size (LEDView and HQUltra models only) PIP* (not available in HQView620/625 & LEDView720/725 Models) System Status Audio (Audio Models: Extensive audio menu is presented in Appendix B ) * Future software release ©... -
Page 66: Calibre Uk Limited - Issue 1.15
1920x1080p23.98 ... 4096x2160p60 RGB/YPbPr Setup Clock Phase 0 ... 31 steps H-Position *Available on selected models © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... - Page 67 Input Menu (2 of 6) V-Position ColorSpace YCbCr Auto Range Full Full Limited Auto Reset Mode CVBS Setup Off / On Digital Inputs DP Config HDMI-1 Config HDM-2 Config HDBT Config* DVI Config HDMI-3 Config Colorspace YCbCr Auto Range Auto Full Limited Auto...
-
Page 68: Calibre Uk Limited - Issue 1.15
White Yellow Cyan Green Magenta Blue Background Multi Color Blue Multi *Available on selected models © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... -
Page 69: Calibre Uk Limited - Issue 1.15
CM 1-4 Height 480 to 2160 1080 CM 1-4 Type Progressive Progressive Interlaced *Available on selected models © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... - Page 70 Input Menu (5 of 6) Color BL-Offset 0 IRE 0 IRE 7.5 IRE Black-Level -50 ... 50 steps Contrast -50 ..50 steps Saturation -50 ..50 steps -50 ..50 steps RGB Values Red Bias -512 ... 512 Red Gain -512 ...
- Page 71 Input Menu (6 of 6) -50% ... 50% Tilt -50% ... 50% Zoom H 25% - 400% Aspect Lock Off, On Zoom V 25% ...400% PTZ Reset Enhancement Sharpness -4 ... 4 steps Details 0 ... 3 steps...
- Page 72 Output Menu (1 of 2) Output Factory Defaults Display Type O/P Mode 1920x1080p 640x480p..4096x2160p Custom 1 -4* CM 1-4 Width 640 to 4096 1280 CM 1-4 Height 480 to 2160 CM 1-4 Type Progressive Progressive Interlaced Frame Rate 59.94Hz 23.98Hz ...
-
Page 73: Calibre Uk Limited - Issue 1.15
© Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... -
Page 74: Calibre Uk Limited - Issue 1.15
0 pxls ... 2160pxls Hor Offset 0 pxls ... 3840pxls Ver Offset 0 pxls ... 2160pxls © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... - Page 75 LED Size Menu (1 of 1) LED Screen Size* Left Edge 0... 4096 Right Edge Hmax 0... 4096 Top Edge 0... 2160 Bottom Edge Vmax 0... 2160 LED Screen Reset Splicing Zoom Off / On Splicing Width 1,2,3,4 Splicing Height 1,2,3,4 Splicing H-Pos 1,2,3,4...
-
Page 76: Calibre Uk Limited - Issue 1.15
These settings interreact with PIP H-Pos and PIP V-Pos PIP Height 0 ... Vmax * Not available on HQView620/625 & LEDView720/725 models © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017... -
Page 77: Calibre Uk Limited - Issue 1.15
Black Level -50 ... 50 Contrast -50 ... 50 Saturation -50 ... 50 -50 ... 50 © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... -
Page 78: Calibre Uk Limited - Issue 1.15
25 sec 30 sec Infinite LCD Backlight 0 ..10 Jog Push Enable Web Colors Dark Dark Light © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... -
Page 79: Calibre Uk Limited - Issue 1.15
The Audio menu for the Audio Audio models is presented in the next Audio Delay section -100 .. 500 ms © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... -
Page 80: Appendix B: Front Panel Audio Menu Tree Structure
Audio Assign Global is Config selected Per Input Global Audio In Stereo Analog Analog with Mics Digital © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... -
Page 81: Calibre Uk Limited - Issue 1.15
Stereo Analog Analog with Mics RGB/YPbPr Analog CVBS Display Port HDMI 1 HDMI 2 HDMI 3 HDBaseT © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... -
Page 82: Calibre Uk Limited - Issue 1.15
Analog with Mics Digital SDI2 Analog CVBS Display Port HDMI 1 HDMI 2 HDMI 3 HDBaseT © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... -
Page 83: Calibre Uk Limited - Issue 1.15
Analog with Mics Digital HDMI-2 Analog CVBS Display Port HDMI 1 HDMI 2 HDMI 3 HDBaseT © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... -
Page 84: Calibre Uk Limited - Issue 1.15
Analog with Mics Digital DVI Analog CVBS Display Port HDMI 1 HDMI 2 HDMI 3 HDBaseT © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... -
Page 85: Calibre Uk Limited - Issue 1.15
Mic1 Phantom Mic2 Phantom Exit Audio Out Mute HDMI HDBaseT DVI/HDMI 3G-DVI Line Mute Loudspeaker Exit Exit © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926... -
Page 86: Appendix C : Single Link Dvi-U Pinout
Analog green Analog blue Analog horizontal sync Analog ground Return for R, G, and B signals © Calibre UK Limited - Issue 1.15 UK: +44 1274 940770 techsupport@calibreuk..com US/CANADA: +1 438 448-3614 13 January 2017 CHINA: +86 95013 5890 6926...
Need help?
Do you have a question about the HQView620 and is the answer not in the manual?
Questions and answers