Advertisement
2
Setup
A
Set the clock
In standby mode, press and hold OSD/
1
DISPLAY on the remote control.
»
The hour digits are displayed and begin to
blink.
Press VOL +/- on the remote control to
2
set the hours.
Press OSD/DISPLAY.
3
»
The minute digits are displayed and begin to
blink.
4
Press VOL +/- to set the minutes.
5
Press OSD/DISPLAY to confi rm the time.
3
Enjoy
A
Play disc
Press DISC to select the disc source.
1
Press OPEN/CLOSE to open the disc
2
compartment.
3
Insert a disc with the printed side facing
up, then close the disc compartment.
»
Play starts automatically.
•
To pause/resume play, press
•
To stop play, press
B
Play from USB
1
Insert the USB plug of a USB device into
the USB socket.
Press USB to select the USB source.
2
»
Play starts automatically.
•
To pause/resume play, press
•
To stop play, press
.
9 .
.
9 .
Advertisement
