Region Codes - Philips FWD185/98 Quick Use Manual

Make sure your DVD system and TV are connected and turned on!
1
2
3
4
5
6
7

Region Codes

DVDs must be labeled for ALL regions or Region 3,
in order to play on this DVD system.
You should find the below accessories in the packaging box.
Audio cable
( white , red )
Remote control and
AAA sise batteries
Detailed playback features and additional functions are described in the
Plug & Play
Turn on the system.
"AUTO INSTALL PRESS PLAY" will be displayed.
Press PLAY 2; on the system to start installation.
Playing a disc
Press DISC on the remote control to select disc mode.
Turn on the TV and select the correct Video In mode.
You should see the blue Philips DVD background screen on the TV (If no disc in the DVD
system).
Press OPEN CLOSE on the front of the DVD system and load a disc, then
0
press the corresponding OPEN
Make sure the disc label is facing up. For double-sided discs, load the side you want to play
face up.
Playback will start automatically.
1 / 2 / 5 / 4
If a disc menu appears, use
selection, then press OK to confirm. Or, use the
features. Follow the instructions given in the disc menu.
To stop playback, press STOP 9.
MW loop
antenna
AC power cable
accompanying owner's manual
CLOSE again to close the disc tray.
0
buttons on the remote to make the necessary
Numeric Keypad
FM antenna
( T type)
( pig tail )
Component vide cable
Composite vide
( red , blue , green )
cable ( yellow )
on the remote to select