Cd Recorder - Philips FW930P2/2 User Manual

CD RECORDER

General Information
• With your Philips CD Recordable/
ReWritable Recorder, you can record,
play and erase your own high-quality
audio CDs, subject to legal restrictions
on copying. Naturally, you will also be
able to play all pre-recorded audio CDs.
• For recording use, special audio discs
must be used (for music only). These
Discs bear the logos as shown below.
The text 'DIGITAL AUDIO' is present!
– CD-Audio Recordable (CDR) discs:
fully recorded and
finalized, these discs
play on all CD players
and recorders.
– CD-Audio ReWritable (CDRW) discs:
can be recorded, erased
and re-recorded
hundreds of times.
When finalized, they
play on CDRW compatible CD players
and recorders. In the course of 1999
most Philips CD players and
recorders will be CDRW compatible.
• To ensure proper working of the set we
recommend the use of Philips audio CDR
and audio CDRW discs only.
• Your CD Recorder is able to playback all
audio CD, finalized audio CD-
Recordable and finalized audio CD-
Rewritable format discs.
16
Accessories
(Supplied)
– 2 Analog audio cables (with red and
white plugs)
– 1 Digital coaxial cable (with black plugs)
– Power cord
DISPLAY indications
1 2 3 4 5 6
REM REC TIME TRACK TOTAL REM TRACK TIME FADE STEP
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 +
24
DIGITAL I PROGRAM MANUAL SYNC SCAN
23 OPTICAL I
CD RW SHUFFLE REPEAT TRACK ALL
ANALOG
22
21 20 19 18 17 16 15 14 13 12 11 10
1 REM/REC TIME
– remaining recording time/recording
time.
2 TRACK
– track number.
3 FE
– balance (lights up during balance
adjustement).
4 TOTAL REM TRACK TIME
– total or remaining time of disc or track.
5 }
– remote control active.
6 STEP
– indicates the number of tracks in a
program.
7 Track bar
– indicates tracks on a disc or in a
program.
– indicates track in playback.
8 + 20
– disc or program contains more than 20
tracks.
9 SCAN
– lights up when the first 10 seconds of
each track are played.
0 REPEAT TRACK/ALL
– lights up when a track/complete disc
(or program) is repeated.
! SYNC
– synchronized recording active.
7
@ SHUFFLE ALL
8
9
– plays tracks in random order.
# MANUAL
– manual recording active.
$ L/R ; ;
– record/play level bar, indicates the
audio signal level.
% PROGRAM
– flashes during programming/lights in
program mode.
^ ;
– pause function active.
& B
– lights up during playback.
* 0
– lights up during recording.
( RW
– unfinalized CDR(W) disc inserted.
) CD
– CD inserted (a pre-recorded CD or
finalized CDR or CDRW disc).
¡
– lights up during recording.
™ ANALOG
– analog input selected.
£ OPTICAL I
– optical input I selected for external
recording.
≤ DIGITAL I
– digital input I selected for external
recording.