Download Print this page

Troubleshooting - Hot Wheels Ai Manual

Car & controller
Hide thumbs Also See for Ai:

Advertisement

CONNECT YOUR GAMING CONTROLLER AND VEHICLE
THE ACTION STARTS ONCE YOU POWER ON YOUR CAR AND CONTROLLER.
NOTE: Make sure you have correctly installed the batteries in both your vehicle and controller (see page 3).
1
Press the
button to POWER ON your controller.
2
If playing for the first time (or after loading a new set of batteries)
you will be asked to select a language.
3
Use the STEERING STICK to toggle left and right
until you hear the language you want to play in.
4
Press the
button to select.
NOTE: You can reset the language at any time by powering off the controller and turning it
back on while pressing down on the
5
Turn the vehicle power switch to I.
I
O
button.
6
Listen for the voice prompt from the
controller to confirm:
"VEHICLE AND
CONTROLLER
CONNECTED"
4

TROUBLESHOOTING

Symptom
Cause
Vehicle will not pair
Batteries in the vehicle or
with the controller
controller are low on power
Vehicle and/or controller
Batteries are low or faulty
continually switches off or
restarts
Vehicle running slowly/controller
Vehicle batteries are low
says "Vehicle Batteries Low"
Controller says
Vehicle batteries low (likely) or
"Connection Lost"
controller batteries low (possible)
Controller frequently says
Interference from other 2.4GHz
"Connection Lost"
equipment including WiFi
after replacing all batteries
The controller is not speaking
Incorrect language set at
the language I require
startup
Controller volume is low
Controller may be set to low
volume
Vehicle does not drive straight
Steering out of alignment
in Freeplay mode
Vehicle does not steer properly
Vehicle tires/body not fitting correctly Check tires are securely on the wheel
Solution
Replace old batteries with high quality
alkaline batteries
Replace old batteries with high quality
alkaline batteries
Replace old batteries with high quality
alkaline batteries
Replace vehicle batteries, if the
problem persists, replace controller batteries
Turn off or move away from other sources
of 2.4GHz transmissions
Switch on the controller while holding
down the 'X' button
Increase volume in the system
settings menu (see page 5)
Adjust steering alignment (see page 8)
covers/Check body shell is properly
attached to the chassis
9

Advertisement

loading