Samsung SRF653CDLS User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Refrigerator
  5. SRF653CDLS
  6. User manual

Samsung SRF653CDLS User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Refrigerator

user manual

imagine
the possibilities
Thank you for purchasing this Samsung product.
Free Standing Appliance
DA68-02954H (EN)-00-
.indd 1
2016. 3. 14.
10:44

Advertisement

Table of Contents
loading

Related Manuals for Samsung SRF653CDLS

Summary of Contents for Samsung SRF653CDLS

  • Page 1: User Manual

    Refrigerator user manual imagine the possibilities Thank you for purchasing this Samsung product. Free Standing Appliance DA68-02954H (EN)-00- .indd 1 2016. 3. 14. 10:44...
  • Page 2 Contents SAFETY INFORMATION ……………………………………………………………… 2 SETTING UP YOUR FRENCH DOOR REFRIGERATOR ………………………… 17 OPERATING YOUR FRENCH DOOR REFRIGERATOR ………………………… 25 TROUBLESHOOTING ………………………………………………………………… 41 Safety information SAFETY INFORMATION used by children aged from 8 years and above • Before operating the and persons with reduced appliance, please read this physical, sensory or mental manual thoroughly and retain capabilities or lack of it for your reference. experience and knowledge • Use this appliance only for if they have been given its intended purpose as supervision or instruction described in this instruction concerning use of the...

  • Page 3: English

    Do NOT attempt. And not all warning signs may be applicable. Do NOT disassemble. If you have any questions or concerns, contact your Do NOT touch. nearest service center or find help and information online Follow directions at www.samsung.com. carefully. • It is hazardous for anyone Unplug the power plug other than an Authorized from the wall socket. Service Person to service this appliance. In Queensland Make sure the machine – the authorized Service is grounded to prevent Person MUST hold a Gas electric shock.
  • Page 4 - When transporting and These warning signs are here to prevent injury to you and installing the appliance, others. care should be taken to Please follow them explicitly. ensure that no parts of After reading this section, the refrigerating circuit are keep it in a safe place for damaged. future reference. SEVERE WARNING WARNING SIGNS FOR SEVERE WARNING WARNING INSTALLATION...
  • Page 5 - This provides the best service of this appliance performance and also is recommended by a prevents overloading house qualified technician or wiring circuits, which could service company. cause a fire hazard from - Failing to do so may result overheated wires. in an electric shock, fire, explosion, problems with the - There is a risk of electric product, or injury. shock or fire. • This refrigerator must be • Do not use a cord that properly installed and located shows cracks or abrasion in accordance with the damage along its length or at manual before it is used. either end. • Do not install the refrigerator • Do not pull or excessively in a damp place or place bend the power cord. where it may come in • Do not twist or tie the power contact with water. cord. - Deteriorated insulation of • Do not hook the power cord electrical parts may cause an over a metal object, place a electric shock or fire.
  • Page 6 • When moving the refrigerator, sure that it is in accordance be careful not to roll over or with local and national damage the power cord. codes. - This may result in an electric • If the supply cord is shock or fire. damaged, it must • This appliance should be be replaced by the positioned in such a way that manufacturer, its service it is accessible to the power agent or similarly plug. qualified persons in order - Failing to do so may result in to avoid a hazard. an electric shock or fire due • The fuse on refrigerator to electric leakage. must be changed by a • Keep the packing materials qualified technician or service out of reach of children. company. - There is a risk of death from - Failing to do so may result suffocation if children put in electric shock or personal them on their head. injury. • This appliance must be properly grounded. • Do not ground the appliance to a gas pipe, plastic water CAUTION SIGNS FOR...
  • Page 7 SEVERE WARNING • Do not sit on the Freezer WARNING door. SIGNS FOR USING - The door may be broken and • Do not touch the power cause a personal injury. plug with wet hands. • To prevent children - This may result in an electric entrapment, you must shock. reinstall the divider using • Do not store articles on the provided screws after top of the appliance. cleaning or other actions if - When you open or close the you removed the divider from door, the articles may fall and the drawer. cause a personal injury and/ • Never put fingers or other or material damage. objects into the dispenser • Do not put items filled with hole, ice chute and ice maker water on the refrigerator. bucket. - If spilled, there is a risk of fire - It may cause a personal or electric shock.
  • Page 8 - Products that require • Bottles should be stored strict temperature controls tightly together so that they must not be stored in the do not fall out. refrigerator. • In the event of a gas leak • Do not place or use electrical (such as propane gas, appliance inside the LP gas, etc.), ventilate refrigerator, unless they are of immediately without touching a type recommended by the the power plug. manufacturer. Do not touch the appliance or power cord. • Do not use a hair dryer to dry the inside of the refrigerator. - Do not use a ventilating fan. Do not place a lighted - A spark may result in an candle in the refrigerator for explosion or fire. removing bad odors. • Use only the LED Lamps - This may result in an electric provided by manufacturer or shock or fire. service agent. • Do not touch the inside walls • Children should be of the freezer or products supervised to ensure that stored in the freezer with wet they do not play with the hands.
  • Page 9 • Do not attempt to repair, with the LED Lamp, do not disassemble, or modify disassemble the Lamp Cover the appliance yourself. and LED Lamp by yourself. - Do not use any fuse (such as - Please contact your service cooper, steel wire, etc.) other agent. than the standard fuse. • If any dust or water is in the - When repairing or reinstalling refrigerator, pull out power the appliance is required, plug and contact your contact your nearest service Samsung Electronics service center. center. - Failing to do so may result - There is a risk of fire. in an electric shock, fire, • Plug the power plug into the problems with the product, wall socket firmly. or injury. Do not use a damaged power plug, damaged power • If the appliance cord or loose wall socket. generates a strange - This may result in an electric noise, a burning or smell shock or fire.
  • Page 10 - This may result in eye strain refrigerator. due to the ultraviolet rays. - Changes or modifications may result in a personal injury and/or property damage. Any changes or modifications performed by a 3rd party on CAUTION SIGNS FOR this completed appliance CAUTION USING are neither covered under • To get best performance Samsung warranty service, from the product, nor is Samsung responsible - Do not place foods too for safety issues and closely in front of the vents damages that result from 3rd at the rear of the appliance party modifications. as it can obstruct free air • Do not block air holes. circulation in the refrigerator - If the air holes are blocked, compartment. especially with a plastic bag, - Wrap the food up properly or the refrigerator can be over place it in airtight containers cooled.
  • Page 11 refrigerator must only be CAUTION SIGNS CAUTION connected to a potable water FOR CLEANING AND supply only. MAINTENANCE • In order to operate the • Do not clean the ice-maker properly, water appliance by spraying pressure of 138 ~ 862 kPa water directly onto it. (1.4 ~ 8.8 kgf/cm³) is • Do not use benzene, thinner required. or alcohol to clean the • If you have a long vacation appliance. or business trip and won’t - This may result in use water or ice dispensers, discoloration, deformation, close the water valve. damage, electric shock or - Otherwise, water leakage fire. may occur. • Do not use or place any • Wipe excess moisture from substances sensitive the inside and leave the to temperature such doors open. as inflammable sprays, - Otherwise, odor and mold inflammable objects, dry ice, may develop.
  • Page 12 may come off. SEVERE WARNING WARNING SIGNS FOR • If any foreign substance such as water has entered DISPOSAL the appliance, unplug the • Ensure that none of the power plug and contact your pipes on the back of the nearest service center. appliance are damaged - Failing to do so may result in prior to disposal. an electric shock or fire. • R-600a or R-134a is used as • Remove all foreign a refrigerant. substances such as dust or Check the compressor label water from the power plug on the rear of the appliance terminals and contact points or the rating label inside the using a dry cloth on a regular refrigerator to see which basis. refrigerant is used for your - Unplug the power plug and refrigerator. clean it with a dry cloth. When this product contains - Failing to do so may result in flammable gas (Refrigerant an electric shock or fire.
  • Page 13 the open space. ADDITIONAL TIPS FOR PROPER USAGE • When disposing of this or other refrigerator/s, remove • In the event of a power the door/door seals, door failure, call the local office of latch so that children or your Electricity Company and animals cannot become ask how long it is going to trapped inside. last. Leave the shelves in place so - Most power failures that are that children may not easily corrected within an hour climb inside. or two will not affect your • Children should be refrigerator temperatures. supervised to ensure that However, you should they do not enter and play minimize the number of door with the appliance. openings while the power is - If trapped inside, the child off. may become injury and - Should the power failure last suffocate to death. more than 24 hours, remove • Please dispose of the all frozen food.
  • Page 14 • Your appliance is frost free, Saving Energy Tips which means there is no - Install the appliance in a need to manually defrost cool, dry room with adequate your appliance, as this will be ventilation. carried out automatically. Ensure that it is not exposed • Temperature rise during to direct sunlight and never defrosting can comply with put it near a direct source of ISO requirements. heat (radiator, for example). But if you want to prevent an - Not to block any vents and undue rise in the temperature grilles is recommended for of the frozen food while energy efficiency. defrosting the appliance, - Allow warm food to cool please wrap the frozen down before placing it in the food up in several layers of appliance. newspaper. - Put frozen food in the refrigerator to thaw. You can then use the low temperatures of the frozen products to cool food in the refrigerator.
  • Page 15 - Ensure sufficient air exhaust This appliance is intended at the refrigerator base to be used in household and and at the back wall of the similar applications such as refrigerator. - staff kitchen areas in shops, Do not cover air vent offices and other working openings. environments; - It is recommended to - farm houses and by install the refrigerator with clients in hotels, motels clearance to the back and and other residential type sides. environments; This will help reduce power - bed and breakfast type consumption and keep your environments; energy bills lower.

  • Page 16: Setting Up Your French Door Refrigerator

    Setting up your French Door Refrigerator GETTING READY TO INSTALL THE REFRIGERATOR Congratulations on your purchase of this Samsung French Door Refrigerator. We hope you enjoy the state-of-art features and efficiencies that this new appliance offers. Selecting the best location for the refrigerator Depth “A” 726 mm Width “B” 908 mm Choose: Height “C” 1749 mm Overall Height “D” 1777 mm • A location with easy access to a water supply. • A location without direct exposure to sunlight.
  • Page 17 When moving your refrigerator REMOVING THE REFRIGERATOR DOORS To prevent floor damage, be sure the front adjusting legs are in the up position (above CAUTION For some installations, you need to remove the the floor). fridge and freezer drawers so you can move the Refer to “Leveling the Refrigerator” on refrigerator to its final location. page 20. Do not remove the doors/drawer if you don’t need to. If you do not need to remove the refrigerator doors, go to “Leveling the Refrigerator” on page 20. If you need to remove the doors. continue below. Before removing the door/drawer, make sure you read the following items: Flat-blade screw Control Lever driver (-) Disconnect power to the refrigerator before removing the door or drawer. WARNING Flooring • Be careful not to drop, damage or scratch the door / drawer while removing For proper installation, you must place this them. refrigerator on a level, hard surface that is the • Be careful not to injure yourself while removing same height as the rest of the floor.
  • Page 18 Required Tools (Not provided) 3. Pull and remove the hinge lever ( 5 ). Remove the ground screw ( 6 ) attached to the You need the following tools to complete the upper left door hinges with a philips screwdriver installation of your refrigerator: (+). Remove the upper left and right door hinges ( 7 ). Philips Flat-blade screw Socket wrench screwdriver (+) driver (-) (13/32”) (10 mm) Allen wrench Pliers (3/16”) (5 mm) 4. Lift the door straight up to remove. With the door opened 1. Remove 3 screws holding down the TOP TABLE ( 1 ) and separate the connected wires. 5. Remove the screw ( 8 ) attached to the lower left and right door hinges with a philips screwdriver (+). Remove the 2 hex head bolts ( 9 ) attached to the lower left and right door hinges with an allen wrench (3/16”). Remove the lower left and right door hinges 2. Disconnect two connectors ( 2 ) on the left side ( 10 ).

  • Page 19: Reattaching The Refrigerator Doors

    REATTACHING THE 3. Take out the lower basket ( 2 ) by lifting the REFRIGERATOR DOORS basket up from the rail system. To reattach the fridge doors after you have moved the fridge to its final location, assemble the parts in reverse order. 1. The Water Line must be fully inserted into the center of the transparent coupler (Type A) or the Guide Lines (Type B) to prevent water leakage from the dispenser. You can scratch the side of the bin if you twist it left or right when disassembling or CAUTION Type A Type B re-assembling it. 4. Press the fixing hook of the rail system. Dispenser Center of Transparent The Guide Lines coupler DISASSEMBLE THE FREEZER 5. Holding the top of the Freezer Drawer, pull it out all the way, and then remove it from the rail DRAWER system.

  • Page 20: Leveling The Refrigerator

    Putting too much food into the freezer LEVELING THE REFRIGERATOR drawers can prevent the freezer from CAUTION Make sure the refrigerator is level so that you can closing completely and can cause frost make final adjustments. build-up. Use a level to test if the refrigerator is level both side to side and back to front. If the refrigerator is not level, you will not be able to get the doors perfectly even, which may cause moisture condensation and increased energy bills. Below is an example of how to level the refrigerator if the left side of the refrigerator is lower than the right side. How to adjust the level 1. Open the freezer drawer and remove the lower basket. 2. Insert a flat-blade screwdriver (-) into a notch on the left control lever, and then turn it counter- clockwise to level the refrigerator. (You turn the lever clockwise to lower the refrigerator and counterclockwise to raise it.) RE-ASSEMBLE THE FREEZER DRAWER flat-blade Control Lever screwdriver (-) To reattach the drawer after you have moved the fridge to its final location, assemble the parts in reverse order.

  • Page 21: Making Minor Adjustments Between Doors

    MAKING MINOR ADJUSTMENTS INSTALLING THE WATER BETWEEN DOORS DISPENSER LINE Remember, a leveled refrigerator is necessary for A water dispenser with a filter is one of the helpful getting the doors perfectly even. features on your new refrigerator. If you need help, review the previous section on To help promote better health, the water filter leveling the refrigerator. removes unwanted particles from your water. However, it does not sterilize or destroy microorganisms. You may need to purchase a water purifying system to do that. In order for the ice maker to operate properly, a water pressure of 138 ~ 862 kPa is required. Under normal conditions, a 170 cc (5.75 oz.) cup can be filled in about 10 seconds. If the refrigerator is installed in an area with low Adjustment part Fixed part water pressure (below 138 kPa), you can install a booster pump to compensate for the low pressure. After you have connected the water line, make sure the water storage tank inside the refrigerator The left door is fixed. is properly filled. To make minor adjustments between To do this, press the water dispenser lever until the doors, adjust only the right door. water runs from the water outlet.
  • Page 22 Water pipe Water Line from unit 4. After connecting the water supply to the water filter, turn your main water supply back on and No gap dispense about 3 L to clear and prime the Water Line from water filter. Before being used, the leakage in these places should be examined. CAUTION • Samsung Warranty does not cover WATER LINE INSTALLATION. • It will be done at customer’s charge unless the retail price includes installation cost. • Please contact Plumber or Authorized Installer for the installation if needed. • If Water leakage occurs due to improper installation, Please contact installer. English - 22 DA68-02954H (EN)-00- .indd 22 2016. 3. 14.

  • Page 23: Completing The Set Up

    COMPLETING THE SET UP Now that you have your new refrigerator installed in place, you are ready to set up and enjoy the features and functions of the appliance. By completing the following steps, your refrigerator should be fully operational. 1. Make sure your refrigerator is in an appropriate location with reasonable clearance between it and the wall. Refer to installation instructions in this manual. 2. Once the refrigerator is plugged in, make sure the interior light comes on when you open the doors. 3. Set the Temperature control to the coldest temperature and wait for an hour. The freezer will get slightly chilled and the motor will run smoothly. Reset the refrigerator and freezer to the temperatures you want. 4. After you plug the refrigerator in, it will take a few hours to reach the appropriate temperature. You can store food and drinks in the refrigerator after the temperature is sufficiently cool. If condensation or water drops appear on both sides of the fridge door’s central part, turn the Energy Saver mode off after removing the condensation. (See the explanation of the Energy Saver button in “Using the control panel” on page 25.) English - 23 DA68-02954H (EN)-00- .indd 23 2016.

  • Page 24: Operating Your French Door Refrigerator

    Operating your French Door Refrigerator USING THE CONTROL PANEL ( 2 ) Alarm / Filter Reset (3 sec) The Alarm button serves two purposes: - To turn the door open alarm on and off - To reset the water filter life indicator. 1. Door Alarm Function If the door alarm is set to On, an alarm beeps if any refrigerator door is left open for more than three minutes. (10) The beeping stops when you close the door. The door alarm function is pre-set to On in the factory. You can turn it off by pressing and then ( 1 ) Freezer / Power Freeze (3 sec) releasing the Alarm button.
  • Page 25 ( 3 ) Energy Saver ( 5 ) Lighting / °C °F (3 sec) ↔ Touching this button turns Energy Saver The Lighting button serves two purposes: mode on and off. - To turn the dispenser light on and off When you turn Energy Saver on, the - To switch the temperature units Energy Saver icon lights. between ºC and ºF. Turn Energy Saver off and the icon goes off. 1. Light Function The Energy Saver function automatically Touching the Lighting button turns on the turns on when power is supplied to the Dispenser LED lamp in continuous mode refrigerator. so that it stays on continuously. If condensation or water drops appear on The button also lights up. the doors, turn the Energy Saver mode If you want the Dispenser lamp to off. come on only when some one uses the dispenser, press the Lighting button to turn the continuous mode off.
  • Page 26 ( 7 ) Water ( 9 ) Ice Type Touch this button to dispense water. Touch this button to select your desired This mode can not be used with the Ice ice type. Type mode simultaneously. Cubed and crushed ice modes alternate Water mode shuts off when you touch the when you press the button. Cubed / Crushed Ice button. This mode can not be used with the Water mode simultaneously. To save electricity, the Panel Display turns off automatically under the following conditions: Ice Maker Off / When no button has been pressed, when no (10) doors are open, or when no Dispenser Lever Control Lock (3 sec)

  • Page 27: Changing The Water Filter

    CHANGING THE WATER FILTER To reduce risk of water damage to your property DO NOT use generic brands WARNING of water filters in your SAMSUNG Refrigerator. 3. Insert the new filter into the filter case ( 4 ). USE ONLY SAMSUNG BRAND WATER FILTERS. SAMSUNG is not legally responsible for any damage, including, but not limited to, property (Red) damage caused by water leakage from the use of a generic water filter. SAMSUNG Refrigerators are designed to work ONLY WITH SAMSUNG Water Filters. The Filter light turns red to let you know when it is 4. Push the filter, and then turn it clockwise until time to change your water filter cartridge. it locks. To give you time to get a new filter, the red light comes on just before the capacity of the current • If you have trouble inserting the water filter runs out. filter because of high water pressure, Changing the filter on time provides you with the shut off the water supply valve. freshest, cleanest water from your refrigerator. 1. Shut off the water supply. Then, turn the water filter ( 1 ) about 1/4 turn, counter-clockwise. 2. Pull the water filter ( 1 ) from the case filter ( 2 ). • The locked symbol should be lined up with the indicator line.
  • Page 28 Removing any residual matter inside the Reverse Osmosis Water Supply water supply line after installing the water IMPORTANT: filter. The pressure of the water supply coming out of a reverse osmosis system going to the water inlet 1. Turn ON the the water supply if you turned it off valve of the refrigerator needs to be between 35 when you installed the water filter. and 120 psi. (241 and 827 kPa) If a reverse osmosis water filtration system is 2. Run water through the dispenser until the water connected to your cold water supply, the water runs clear (approx. 6 to 7 minutes). pressure to the reverse osmosis system needs to This will clean the water supply system and be a minimum of 40 to 60 psi. (276 to 414 kPa) remove air from the lines. If the water pressure to the reverse osmosis system is less than 40 to 60 psi (276 to 414 kPa): 3. Additional flushing may be required in some households. • Check if the sediment filter in the reverse 4. Open the Refrigerator door and make sure osmosis system is blocked.

  • Page 29: Controlling The Temperature

    CONTROLLING THE Controlling the fridge temperature TEMPERATURE Basic temperature of Freezer and fridge compartments The basic and recommended temperatures of the Freezer and Fridge compartments are 0 °F and 37 °F (or -18 °C and 3 °C) respectively. If the temperature of the Freezer and Fridge compartments are too high or low, adjust the temperature manually. Recommend Temp (Fridge) : 37 °F (or 3 °C ) Controlling the Freezer temperature The fridge temperature can be set between 34 °F and 44 °F (or between 1 °C and 7 °C) to suit your particular needs. Press the Fridge button repeatedly until the desired temperature is shown in the temperature display. The temperature will change by 1 °F (or 1 °C) with each press. See below. Fahrenheit : 37 °F ➞ 36 °F ➞ 35 °F ➞ 34 °F ➞ 44 °F ➞ 43 °F ➞ 42 °F ➞ 41 °F ➞ 40 °F ➞ 39 °F ➞ 38 °F ➞37 °F.

  • Page 30: Using The Ice Dispenser

    • To select Ice, press the ICE type button of • If there is a communication error between the your choice on the display, and then press the Display and Main Controller, the Convertible dispenser lever. Display light may blink. • If you have selected cubed ice, when you press If the blinking continues for a long period of the lever, the dispenser may dispense a small time, please contact a Samsung Electronics amount of crushed ice first. Service Center. • If ice doesn’t come out, pull out the ice bucket and press the test button located on the right side of ice maker. USING THE COLD WATER DISPENSER Check the water level Push the appropriate ice type button to select what you want dispensed.

  • Page 31: Ice Making

    Ice Making If you use all the ice at once, you must repeat Steps 2 and 3 under Ice Making. To fill the ice bucket to maximum capacity after However, only wait 8 hours before installation, follow these steps: dispensing the first 4 to 6 ice cubes. This will replenish the ice cubes and 1. Allow your refrigerator to operate and cool ensure maximum ice production. down for 24 hours (or 1 full day). - Waiting 24 hours will allow your ice maker to cool properly. 2. Dispense 4 to 6 ice cubes into a glass. Using the ice off Function 3. After 8, and then 16 hours, dispense a full glass of ice. When you select the Ice Off mode, remove all ice cubes from the bucket. If you leave the ice cubes in the bucket, the ice • To clean the ice bin/bucket, wash with a cubes may clump together, making it difficult to mild detergent, rinse well, and then dry it CAUTION remove them. thoroughly. To remove the ice bucket safely and avoid injury, Do not use harsh or abrasive cleaners or hold the bottom of the bucket with one hand and solvents. the side of the bucket with the other.
  • Page 32 Going on vacation... Water clouding phenomenon All water provided to the refrigerator flows If you are going on a long vacation or business trip through the core filter which is an alkaline and won’t use the water or ice dispensers for a water filter. long time: In the filtering process, the pressure of the water that has flowed out of the filter • Close the water valve. is increased, and the water becomes Otherwise, water leakage may occur. saturated with oxygen and nitrogen. • Remove all food and ice in the ice bucket. When this water flows out into the air, the • Unplug the refrigerator. pressure plummets and the oxygen and • Wipe excess moisture from inside and leave nitrogen get supersaturated, which results the doors open. Otherwise, odor and mold may in gas bubbles. develop. The water may temporarily look misty or cloudy due to these oxygen bubbles. After a few seconds, the water will look clear. Ice Maker Do’s and Don’ts • Do not put your fingers, hands or any other Please wait 1 second before removing unsuitable objects in the chute or ice-maker...

  • Page 33: Parts And Features

    Drawers Cool Select Pantry  PLUS Light FZ Ice-Maker Auto Pull Out Drawer Ice Bucket Freezer Drawer Bin Guard When closing the door, make sure the Vertical Hinged Section is in the correct position to avoid scratching the other door. If the Vertical Hinged Section is reversed, put it back to the right position and close the door. Moisture may appear at times on the Vertical Hinged Section. The door handle may become loose over time. If this happens, tighten the bolts found on the inside of the door. If you close one door with too much force, the other door may open. When the door opens, the interlock switch automatically turns off the auger motor in the ice maker for safety reasons. When the interior or exterior LED lamp has gone out, please contact Samsung Customer Support. English - 33 DA68-02954H (EN)-00- .indd 33 2016. 3. 14. 10:44...
  • Page 34 USING THE COOL SELECT The Pantry Selection Button PANTRY™ 1. When you select “Deli”, the temperature of the pantry will be kept around 41 °F (or 5 °C). The Cool Select Pantry™ is a full-width drawer This feature helps keep food fresh for a long with adjustable temperature control. time. This pantry can be used for large party trays, deli 2. When you select “Fresh”, the temperature of items, pizza, beverages, or miscellaneous items. the pantry will be kept around 38 °F (or 3 °C). There is a temperature control which can adjust This feature helps keep food fresh for a longer the amount of cold air allowed into the pantry. time. The control is located on the right side of the 3. When you select “Chilled”, the temperature of pantry. the pantry will be kept around 34 °F (or 1 °C). This feature also helps keep meat or fish fresh for a longer time. The table below lists the Pantry modes and the kinds of foods that can be stored safely for each mode. • The Pantry has three modes: The Fresh mode, Chilled mode, and Deli mode. Fresh mode is the default. Press the Temp button repeatedly until the mode you want is lit.
  • Page 35 REMOVING THE REFRIGERATOR 2. Tempered Glass shelves - To remove : Tilt up the front of the shelf in the ACCESSORIES direction shown ( 1 ) and lift it up vertically ( 2 ). Pull the shelf out. 1. Door Bins - To relocate : Tilt the front of the shelf up and • Door Bins ( 1 ) guide the shelf hooks into the slots at a desired - To remove : Simply lift the bin up and pull height. Then lower the front of the shelf so that straight out. the hooks can drop into the slots. - To relocate : Slide it in above the desired location and push down until it stops. • Door Bins ( 2 ) - To remove : Take the right side of the bin out by lifting it at an angle along the guide, and then take the left side out by pulling it from the door. - To relocate : Slide it into the original location and push down until it sticks. ( 1 ) The Tempered Glass shelves are heavy.

  • Page 36: Using The Doors

    To remove 4. Cool Select Pantry PLUS - To remove the pantry : Pull the pantry out to • Simply lift the bin up and pull straight out. full extension. Tilt up the front side of the pantry and pull straight out. - To relocate the pantry : Push the rails to the back of the refrigerator. Place the drawer onto the rails and slide the pantry back until it is in place. • Tilt up the front of the drawer and pull straight out, and pull out the drawer after moving slightly in the direction of the arrow. - To remove the divider : Pull the pantry completely out to full extension and raise the front side of the divider to unhook it from the rear wall of the pantry, then lift the divider out. - To relocate the divider : Hook the back of the divider over the rear wall of the pantry and push the divider down.
  • Page 37 REMOVING THE FREEZER 4. Freezer Drawer - To remove the freezer drawer : Pull the ACCESSORIES freezer drawer out fully. Tilt up the rear of the bin and lift it out to remove. 1. Freezer Room Guard - To relocate the freezer drawer : Place the bin - To remove : Remove the freezer room guard into the rail assembly. ( 1 ) by lifting the guard up. - To relocate : Push down until the guard ( 1 ) locks into place. 2. Ice Bucket - To remove : Lift the ice bucket ( 1 ). - To relocate : Place the ice bucket into the You can scratch the side of the bin if you Super extended drawer ( 2 ).

  • Page 38: Cleaning The Refrigerator

    CLEANING THE REFRIGERATOR Do not use benzene, thinner, or Clorox for cleaning. CAUTION Caring for your Samsung French Door Refrigerator They may damage the surface of the prolongs the life of your appliance and helps keep appliance and may cause a fire. the refrigerator free of odor and germs. You can erase the printed letters on the display if you Cleaning the Interior CAUTION apply stainless cleaner directly Clean the inside walls and accessories with a mild to the area where the letters detergent and then wipe dry with a soft cloth. are printed. You can remove the drawers and shelves for a more thorough cleaning. Just make sure to dry drawers and shelves before putting them back into place. Cleaning the Ice / Water Dispenser Wipe the Ice / Water Dispenser with a clean and soft cloth. As you use the dispenser’s crushed ice Cleaning the Exterior selection, some residual ice chips may CAUTION Wipe the control panel and digital display with a start to collect in the ice chute.
  • Page 39 Cleaning the Rubber door seals If the rubber door seals are dirty, the doors may not close properly, and the refrigerator will not operate efficiently. Keep the door seals free of dust or stains by cleaning the doors with a mild detergent and damp cloth. Wipe dry with a clean, soft cloth. Do not clean the refrigerator with benzene, thinner, or car detergent. CAUTION These substances could cause a fire. Cleaning the rear side of the refrigerator To keep cords and exposed parts free of dust and dirt accumulation, vacuum the rear side of the appliance once or twice a year. Do not remove the back cover ( 1 ). You could suffer an electric shock. CAUTION English - 39 DA68-02954H (EN)-00- .indd 39 2016. 3. 14. 10:44...

  • Page 40: Troubleshooting

    Troubleshooting PROBLEM SOLUTION The refrigerator • Check if the power plug is properly connected. • Check if the set temperature on the digital display is warmer than the freezer or fridge does not work at inner temperature. If it is, set the freezer or fridge to a colder temperature. all or it does not • Is the refrigerator in direct sunlight or located near a heat source? chill sufficiently. If so, it may not be able to cool sufficiently. Install it in a location that is out of direct sunlight and not near a heat source. • Is the back of the refrigerator too close to the wall, preventing proper ventilation? If so, it may not be able to cool sufficiently. Keep it an appropriate distance from the wall. • Is there too much food inside so that the food is blocking the outlet vent? To keep the refrigerator at a suitable temperature, do not fill the refrigerator with too much food. The food in the • Check if the set temperature on the digital display is too low. If so, raise the set temperature inside the refrigerator. fridge is frozen.
  • Page 41 PROBLEM SOLUTION Frost forms on • Is the air vent blocked? Remove any obstructions so air can circulate freely. the walls of the • Allow sufficient space between the stored foods for efficient air circulation. freezer. • Is the freezer drawer closed properly? If the freezer drawer is not completely closed or is blocked, humidity from outside may enter and cause severe frost to form. The water • Is the water line connected and the shut-off valve opened? • Has the water supply line tubing been crushed or kinked? dispenser is not • Make sure the tubing is free and clear of any obstruction. functioning. • Is the water tank frozen because the fridge temperature is too low? Try selecting a warmer setting on the Digital display. • Is the Child Lock on? • Check if the filter is properly installed. If it is not properly installed, the water dispenser may not work. The auto close • Is there an imbalance between the right and left parts of the door? • Open and close the door smoothly 1~2 times.
  • Page 42 Memo DA68-02954H (EN)-00- .indd 42 2016. 3. 14. 10:44...
  • Page 43 Memo DA68-02954H (EN)-00- .indd 43 2016. 3. 14. 10:44...
  • Page 44 Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. COUNTRY...

Table of Contents