Oven Ignition; Oven Vent - Roper B400 Use And Care Manual

IMPORTANT: The model
and serial number of
your oven Is found on a
tag, behlnd the oven
door, on the left side of
1. Oven Light Switch
2. Oven Vent (area may get
hot during oven use; Do Not
block ven 1)
the front frame.
Copy the numbers into
the box on the cover of
thls manual.
-
3. Electronic Oven Control (see
next page)
-
6. Removable Oven Bottom
7. Removable Oven Door
and
OVEN IGNITION
When you turn the oven on, the glow bar igniter begins to
heat. When the igniter is hot enough, in about 1 minute, the
gas flows into the burner and is ignited.
The igniler glows bright orange when hot. It cycles on and
off with the thermostat and will glow whenever the burner is
on.
OVEN VENT
When the oven is on, heated air moves through a vent under
the control panel. This hot air may make control panel area
hot.
The vent is necessary for proper air circulation in the oven
and good baking results.
Do not block thls vent. Dolng so
may cause cooklng failure, fire or damage to the range.
Durlngapowerfalluretheburnercannot
be IR and you should not try to do so.
1
GBIF07