Loading Nailer; Removing Nails - Makita AF601 Instruction Manual

Air duster
CAUTION:
Do not aim the ejection port of the
air duster to someone. Also, keep your hands and
foot away from the ejection port. If the air duster
button is accidentally pushed, it may cause a per-
sonal injury.
CAUTION:
Always check your surroundings
before using the air duster. Blown dust or objects
may hit someone.
CAUTION:
Do not connect or disconnect the
air hose while pushing the air duster button.
The air supplied to the tool can also be used as an air
duster. You can clean the work area by pressing the
button on the grip end.
1
► 1 . Button
NOTICE:
After using the air duster, the driving force
of the tool will temporarily decline. Wait until the air
pressure recovers in this case.
NOTICE:
Perform a test blow if you use the air
duster immediately after the oil was applied. The oil
may be sprayed with the air.
ASSEMBLY
CAUTION:
Before carrying out any work on
the tool, always return the trigger and disconnect
the air hose from the tool.
CAUTION:
Load the same type, size and
uniform length of nails when loading nails in the
magazine.

Loading nailer

1. Pull the pusher lever until it is locked at the maga-
zine end.
► 1 . Pusher lever
2. Insert a strip of nails into the slit in the rear of the
magazine and push the strip toward the firing opening.
► 1 . Magazine
3. With pushing the pusher button, return the pusher
lever to the end of the strip gently.
► 1 . Pusher button 2. Pusher lever
CAUTION:
Always hold the pusher lever
when you press the pusher button to return the
pusher lever, otherwise the pusher lever suddenly
returns, it may cause personal injury.

Removing nails

1. Pull the pusher lever until it is locked at the maga-
zine end.
2. Slide the nails toward the rear of the magazine
and remove them out.
6 ENGLISH
1
1
1
2