Troubleshooting - Odys MultiFlat 19 inch User Manual

ODYS MultiFlat 19"-CINEMA-DVB-T/DVD

11 Troubleshooting

Carry out the problem-solving measures described in the following section before contacting
Customer Support. Turn off the device immediately as soon as you suspect a malfunction and unplug
the power plug. Do not attempt to repair the device yourself.
SYMPTOM
LCD screen stays
dark.
The player cannot
play.
There is no sound.
Cannot continue to
play and play a section
repeatedly.
There is no picture or
picture move up and
down unsteady.
The remote control
does not work.
Other Notes:
Static or other external interfere may cause the player to behave abnormally. In this occurs, unplug
the power-supply cord from the outlet and plug it in again to reset the player. If the problems persist,
then please disconnect the power and consult a qualified technician.
48
Make sure the unit is turned on and the connections are correct.
Make sure the power adapter is correctly connected.
Make sure the disc is loaded in.
Make sure the disc is loaded upside down.
Make sure the disc is not dirty or warped.
Make sure the player's region code is the same as the region code of
the DVD disc.
Make sure water condensation has not occurred.
If it occurs, take out disc and leave the player on for at least one hour.
Make sure the system connection is correct.
Make sure the power of speakers is turned on.
Make sure the sound setup of DVD disc is correct.
Make sure the disc is not dirty or warped.
Clean or replace the disc.
Turn off the repeat mode, if necessary.
Make sure the disc is not dirty or damaged.
Clean the disc or skip the section.
Check if the connections with the external AV signal source are correct.
Correctly set the items in the picture menu.
Check if the video type input signal is not corresponding to the unit.
Make sure the unit is turned on and in correct video type.
Make sure there are no obstructions between the remote control and
the unit.
Make sure the remote control is pointing at the unit.
Make sure the batteries are inserted or the polarity is correct.
Make sure the batteries are not weak.
Replace the weak battery.
CHECK ITEM