Connecting To Pc; Connecting To Tv-Signal Input - Odys MultiFlat 19 inch User Manual

ODYS MultiFlat 19"-CINEMA-DVB-T/DVD

4.11 Connecting to PC

The unit can be connected to PC (personal computer) via the VGA cable. Follow the figure below to
connect:
1. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit and connect
the other end to the PC.
2. Connect one end of the audio cable to the PC audio input jack on the rear panel of the unit and
connect the other end to the PC audio output jack.
3. Set the PC video resolution to match that of the television (typically 1024 x 768@60Hz).
After connection, turn on the power of the unit and the external AV signal source and use the INPUT
and the direction buttons to select VGA mode, and then press the ENTER button to confirm.

4.12 Connecting to TV-Signal Input

Connect the TV signal cable (the antenna cable, for example) to the Antenna Input Jack on the back
of the unit so that you can receive television programmes.
After connection, turn on the power of the unit. Then press the INPUT button to select ATV or DTV
mode and conduct program selection.
19