Connecting To External Av Signal Source (Scart); Connecting To A Coaxial Digital Output Device - Odys MultiFlat 19 inch User Manual

ODYS MultiFlat 19"-CINEMA-DVB-T/DVD

4.5 Connecting to External AV Signal Source (SCART)

Use the SCART cables to connect the SCART input Jacks on the rear panel of the unit to the
external AV signal source.
After connection, turn on the power of the unit and the external AV signal source. Press INPUT then
direction buttons to select SCART mode, and then press the ENTER button to confirm.

4.6 Connecting to a Coaxial Digital Output Device

This unit is designed with a coaxial digital audio jack, can be connected to the digital amplifier, see
the figure below:
This feature is available only for amplifiers equipped with coaxial digital audio input
connectors.
For TVs with a built-in DVD player (optional) and an amplifier with Dolby Digital decoding
function, set the digital audio signal output format in TV setup menu to "RAW".
16