IMI SENSORS 682B03 Installation And Operating Manual page 12

Pin Descriptions:
DC Power – Pins 1 to 3:
Pin 1 +Power
Pin 2 -Power/Common
Pin 3 Earth Ground
®
Accelerometer – Pins 4 to 6:
ICP
Pin 4 Shield
®
Pin 5 + ICP Accelerometer
®
Pin 6 - ICP Accelerometer
Temperature Sensor – Pins 7 to 8:
Pin 7 + Temperature Sensor
Pin 8 - Temperature Sensor (- ICP
Raw Vibration (RV) – Pins 9 to 10, and BNC Jack:
Pin 9 + RV
Pin 10 - RV
4 to 20mA Temperature Output – Pins 11 to 12:
Pin 11 + 4 to 20mA Temperature Output
Pin 12 - 4 to 20mA Temperature Output
4 to 20mA Vibration Output – Pins 13 to 14:
Pin 13 + 4 to 20mA Vibration Output
Pin 14 - 4 to 20mA Vibration Output
0-5/10Vdc Vibration Output – Pins 15 to 16:
Pin 15 + 0-5/10Vdc Vibration Output
Pin 16 - 0-5/10Vdc Vibration Output
Notes:

Pins 3 and 4 are tied together but are NOT tied to the grounding tab on the back of the enclosure.

Land the accelerometer cable's shield on Pin 4.

Tie Pin 3 to either din rail ground or Earth ground with the use of an external wire.
®
Accelerometer)
PAGE 7