Table of Contents
Advertisement
Q u i c k
Introduction
The PhaserLink PL 470 Base Cradle acts as a stand, host
communication interface, and a charger for the Phaser Radio
Scanner. It can sit on a desktop or be wall-mounted - whichever is
more convenient.
The cradle receives data from the scanner via connectors in the
bottom of the scanner and the top of the cradle. It then transmits
that data to the host device through an attached cable.
The cradle also provides power for charging the scanner's battery
pack (in the scanner). The cradle has a charge status indicator light.
There are two versions of the cradle available:
•
PL 470 Base Cradle: the radio retail version
•
PL 370 Base Cradle: the radio industrial version
This Quick Reference Guide provides basic instruction on the set up
and use of the cradle. Unless otherwise noted, the term PhaserLink
refers to all versions of the cradle.
Equipment Supplied
The equipment supplied is:
•
Two Screws (for wall mounting)
•
One Velcro Strip (for desk mounting)
•
Four Rubber Feet (for desk mounting)
•
This Guide
•
Cradle
Save the shipping container for storing or shipping. Inspect all your
equipment for damage. If anything is damaged or missing, call your
authorized Customer Support Representative immediately.
Related Documentation
Phaser Series Scanner Product Reference Guide,
Preliminary
p/n 70-33629-xx
R e f e r e n c e
1
Advertisement
Table of Contents
