Panasonic CF-07 Series Reference Manual page 31

Setup Utility
Security Menu
Parameters
(
Password on boot
Set Supervisor Password
Hard Disk Lock* 1
User Password Protection
1
Set User Password*
Processor Serial Number*
* 1 Setting impossible when the Supervisor Password is not set.
2
* When [Enable] is set for [Processor Serial Number], it is necessary to shut down the computer once.
<Only when the port replicator is connected>
NOTE
When the port replicator is not connected, the computer will start up without the pass-
word even if the password has been set in Setup Utility. Refer to
Password on boot
Set Supervisor Password:
Hard Disk Lock:
User Password Protection:
Set User Password:
Processor Serial Number:
NOTE
When the Setup Utility is started up with the User Password;
[Set Supervisor Password] and [Hard Disk Lock] will not be displayed.
The User Password can be changed only when [User Password Protection] has been
set to [No Protection]. The User Password cannot be deleted.
: Default)
Disable
Enable
To the sub-menu
Disable
Enable
No Protection
Protected
To the sub-menu
2
Enable
Disable
[Enable]
[Enter]
[Disable]
[No Protection]
[Enter]
[Disable]
page 7.
31