Step 3: Connecting Tv; Using Composite Video Jack (Cvbs); Using Component Video Jack (Pr Pb Y) - Philips - MX3950D Manual

Connections
Step 3: Connecting TV
COMPONENT
VIDEO IN
S-VIDEO
IN Pr/Cr
AUDIO
OUT
Pb/Cb
VIDEO IN
Y
L
R
C
DIGITAL AUX
SL OUT IN
L
SR
SUB
R
DIGITAL
IN
IMPORTANT!
– You only need to make one video
connection from the following options,
depending on the capabilities of your TV
system.
– S-Video or Component Video
connection provides higher picture
quality. These options must be available
on your TV.
– Connect the DVD system directly to
the TV.

Using Composite Video jack (CVBS)

1
Use the composite video cable (yellow) to
connect the DVD system's CVBS jack to the
video input jack (or labeled as A/V In, Video In,
Composite or Baseband) on the TV.
2
To hear the TV channels through this DVD
system, use the audio cables (white/red) to
connect TV IN (L/R) jacks to the
corresponding AUDIO OUT jacks on the TV.
3
Set the P-SCAN switch to 'OFF'.
12
pg 001-044_MX39-37-Eng1
COMPONENT
VIDEO IN
S-VIDEO
IN
Pr/Cr
AUDIO
OUT
Pb/Cb
VIDEO IN
Y
AM
FM ANTENNA
1
AUDIO VIDEO
OUT
TV LINE
IN OUT CVBS
Pb
P-SCAN
ON OFF
Y
S-VIDEO
2 3
1
2
3
12
AUDIO
OUT
COMPONENT VIDEO IN
S-VIDEO
IN
AUDIO Pr/Cr
OUT
Pb/Cb
VIDEO IN
Y
L
AM
R
FM ANTENNA
C
AUDIO
DIGITAL AUX TV LINE
SL OUT IN OUT
IN
L
SR
SUB
R
DIGITAL
IN
2
IMPORTANT!
– If both S-Video and Component
(Pr Pb Y) Video connections are used to
connect to your TV, the video signal will
automatically switch to S-Video when
you power up the DVD system. To set
the VIDEO OUT(put) to 'Pr Pb Y', see
page 29.
Using Component Video jacks
(Pr Pb Y)
Use the component video cables (red/blue/
green) to connect the DVD system's Pr Pb Y
jacks to the corresponding Component video
input jacks (or labeled as Pr/Cr Pb/Cb Y or YUV)
on the TV.
To hear the TV channels through this DVD
system, use the audio cables (white/red) to
connect TV IN (L/R) jacks to the
corresponding AUDIO OUT jacks on the TV.
If you are using a Progressive Scan TV (TV must
indicate Progressive Scan or ProScan capability),
set the P-SCAN switch to 'ON'. Otherwise,
set it to 'OFF'.
2/25/03, 10:28 AM
COMPONENT
VIDEO IN
S-VIDEO
IN
Pr/Cr
Pb/Cb
VIDEO IN
Y
1
VIDEO
OUT
Pr
CVBS
Pb
P-SCAN
ON OFF
Y
S-VIDEO
3
3139 115 21993