D-Link DCH-G022 User Manual page 12

DCH-G022
5.2 Factory Default page
After successful log-in, click the Factory Default tab on the left, then you will
enter the factory default page.
Press Restore Factory Default button to reset the device to factory default value
Press Partial Reset button to reset system except Z-Wave controller.
5.3 Z-Wave Main page
This page allows the user to do the advanced Z-Wave configuration of DCH-
G022. After successful log-in, click the Z-Wave Main tab on the left, then you
will enter the Z-Wave Main page.
5.3.1 Z-Wave Basic Commands:
To Include Device / Exclude Device: Press the This process (also known as
"inclusion" and "adding") is achieved by pressing/(hold for 5 seconds) "Wireless
Page 12
D-Link Corporation