Related Manuals for D-Link DCH-G020
Summary of Contents for D-Link DCH-G020
- Page 1 DCH-G020 D-Link Corporation DCH-G020 mydlink™ Connected Home Hub User’s Manual Version 01.1 Feb. 4 , 2015 Data Sheet Page 1 2/11/2015...
-
Page 2: Product Description
D-Link Corporation 1. PRODUCT DESCRIPTION The DCH-G020 is a Connected Home Z-Wave Gateway used to control a variety of Z-wave home sensors for the application of home automation. It is able to talk to variety of Z-Wave sensors and communicate with other D- Link connected Home devices. -
Page 3: Installation And Configuration
3. APPLICATIONS 4. INSTALLATION & CONFIGURATION Step 1 Make sure your mobile device connected to the same network as DCH-G020 Step 2 Follow the Quick Install Card to scan the QR code to download the App. Step 3 Install App and run it. - Page 4 DCH-G020 D-Link Corporation Step 5 Add a new device and select Gateway DCH-G020. A. Select Add new device to add a new device. B. Scan device QR code or skip the QR code to manual select the device. Data Sheet...
- Page 5 DCH-G020 D-Link Corporation Step 6 Follow the instructions to setup the DCH-G020 Data Sheet Page 5 2/11/2015...
- Page 6 DCH-G020 D-Link Corporation Step 7 Find the DCH-G020 and click to select it. Step 8 Enter the Pin Code of your DCH-G020. Data Sheet Page 6 2/11/2015...
- Page 7 DCH-G020 D-Link Corporation Step 9 Give a name of your DCH-G020. Step 10 See a DCH-G020 on the device list, then you can continue to add Z-wave sensors or other D-Link Connected Home devices. Data Sheet Page 7 2/11/2015...
- Page 8 DCH-G020 D-Link Corporation Click the device to see more information of the device. Make a Policy for Devices Data Sheet Page 8 2/11/2015...
- Page 9 DCH-G020 D-Link Corporation Make a Group for Devices You can click the Notification to see the triggered information, click Schedule to configure the device working schedule, and click Sign out to log out the device. Data Sheet Page 9 2/11/2015...
- Page 10 DCH-G020 D-Link Corporation Advance Configuration Before enter the advance configuration, you need to open an Internet browser on the PC and type http://dch-g020x to login the web page Key-in PIN code to login Manually Firmware Update After successful log-in, you will enter the firmware update page.
- Page 11 DCH-G020 D-Link Corporation Z-Wave Configuration After successful log-in, type http://dch-g020x/zwave.htm on the browser to enter below page. Press “Go To Z-wave Page” to do advanced Z-wave configuration as below shown. Data Sheet Page 11 2/11/2015...
- Page 12 (How to add/remove another Controller (a secondary Controller): same as including a Z-wave node.) Learn Mode: Starts learn mode for DCH-G020 if it is needed to include it in another controller’s network. Reset Z-Wave Controller: Reset the Z-Wave controller only.
- Page 13 DCH-G020 D-Link Corporation Node Information: Display the basic type, generic type and specific type of DCH- G020. ZW_Capability: the Z-Wave capabilities of DCH-G0202 SUC_ID: the ID of Static Update Server Data Sheet Page 13 2/11/2015...
- Page 14 : (Non-Security) Node 3 is included by DCH-G020 without security Additional Notes: 1. The Z-Wave Grouping Identifier of DCH-G020 is 1 and used for the Lifeline association. 2. The maximum number of devices that can be added to the group is 1.