Advertisement
3. Press the Options soft key, and then select Edit.
4. Edit the values in the Name, Number and Mobile fields.
5. Press the Save soft key to accept the change.
To delete a contact:
1. Press the OK key to enter the main menu, and then select Directory.
2. Press
or
to highlight the desired entry.
3. Press the Options soft key, and then select Delete to delete the selected entry.
To assign a speed dial number:
1. Press the OK key to enter the main menu, and then select Settings->Telephony -> Speed Dial.
2. Press
or
to highlight the desired speed dial key, and then press the Assign soft key.
3. Press
or
to highlight the desired entry, and then press the OK soft key.
If both the office number and mobile numbe are stored, press
the desired number, and then press the OK soft key again.
Basic Call Features
Placing Calls
To place a call directly:
Enter the desired number when the handset is idle, and then press
To place a call from the local directory:
1. Press
when the handset is idle.
2. Press
or
to highlight the desired entry, and then press
If both the office number and mobile number are stored, press
the desired number, and then press
again.
To place a call from the call history:
1. Press the History soft key, and then select the desired call history list.
2. Press
or
to highlight the desired entry, and then press
To place a call from the redial number list:
1. Press
when the handset is idle.
2. Press
or
to highlight the desired entry, and then press.
To place a call using the speed dial key:
Long press the speed dial key to place a call to the number assigned to it.
Answering Calls
To answer a call, do one of the following:
Press the Accept soft key.
Press
.
Press
.
Note: You can ignore an incoming call by pressing the Silence soft key or reject an incoming call by
pressing
.
Ending Calls
Press
.
5
or
to highlight
.
.
or
to highlight
.
b. PoE (Power over Ethernet) Option
2. Connect the charger cradle, as shown below:
3. Insert the batteries into the handset, as shown below:
4. Charge the handset, as shown below:
Note: The charging status of the handset is indicated in the top right-hand corner of the LCD screen.
IEEE 802.3af compliant
PoE Hub/Switch
2
Advertisement
