Advertisement
Packaging Contents
The following items are included in your W52P package:
Base Station
Handset
Two Rechargeable
Belt Clip
Ethernet Cable
Batteries
The following items are included in your W52H package:
Handset
Charger Cradle
Power Adapter
Assembling the Phone
1. Connect the network and power for the base station in one of the
following ways, as shown below:
a. AC Power Option
1
(Optional)
Charger Cradle
Two Power Adapters
Quick Start Guide
Belt Clip
Two Rechargeable
Batteries
Call Mute
Press
during a call to mute the call.
Press
again to un-mute the call.
Call Hold and Resume
To place a call on hold:
Press the Options soft key during a call , and then select Hold.
To resume a call, do one of the following:
If there is only a call on hold, press the Resume soft key.
If there are two calls on hold, press the Resume soft key to resume the current call,
press the Swap soft key to swap between calls.
Call Transfer
You can transfer a call in the following ways:
Blind Transfer
1. Press the Options soft key during a call, and then select Transfer.
2. Enter the number you want to transfer the call to.
3. Press the Transfer soft key.
Semi-Attended Transfer
1. Press the Options soft key during a call, and then select Transfer.
2. Enter the number you want to transfer the call to.
3. Press
to dial out.
4. Press the Transfer soft key when you hear the ring-back tone.
Attended Transfer
1. Press the Options soft key during a call, and then select Transfer.
2. Enter the number you want to transfer the call to.
3. Press
to dial out.
4. Press the Transfer soft key after the call is answered.
Call Forward
To enable the call forward feature on a specific line:
1. Press the OK key to enter the main menu, and then select Call Features -> Call Forward.
2. Press
or
to highlight the desired line, and then press the OK soft key.
3. Press
or
to highlight the desired forwarding type, and then press the OK soft key.
Always---- Incoming calls are forwarded immediately.
Busy----Incoming calls are forwarded when the line is busy.
No Answer---- Incoming calls are forwarded if not answered after a period of time.
4. Select Enabled from the Status field.
5. Enter the number you want to forward the incoming calls to in the Target field.
6. Press
or
to select the desired ring time to wait before forwarding (only for No
Answer Forward) in the After Ring Time field.
7. Press the Save soft key to accept the change.
6
Advertisement
