Download Print this page

CALLSWITCH W52 Quick Start Manual page 3

Advertisement

Getting Started
Network Settings
You can configure the base station to obtain network settings in one of the following ways:
DHCP: By default, the base station attempts to contact a DHCP server in your network to
obtain the valid network settings, e.g., IP address, subnet mask, gateway address
and DNS address.
Static: If the base station cannot contact a DHCP server for any reason, you need
to configure
the IP address, subnet mask, gateway address, primary DNS address
and secondary DNS address for the base station manually.
PPPoE : If you are using an xDSL modem, you can connect your phone to the Internet via
PPPoE mode. Contact the ITSP for the account and password.
To configure the network parameters for the base station manually:
1. Press the OK key to enter the main menu, and then select Settings -> System Settings->
Network.
2. Enter the system PIN (default: 0000), and then press the Done soft key.
3. Select desired type from the IP Address Type field.
4. Make the desired changes.
5. Press the Save soft key to accept the change.
Wrong network settings may result in inaccessibility of your phone and may have an impact
Note:
on the network performance. For more information on these parameters, contact your system
administrator.
Handset Registration
The handset in the W52P package is pre-registered to the base station. Internal handset
number and name display on the idle screen after turning the handset on. If your handset
is not pre-registered to the base station, do one of the followings to register it manually:
If the handset LCD screen prompts "Searching for Base", long press
station till the registration LED flashes. Then press the OK key to enter the main menu,
and then select Settings-> Registration -> Register Handset to register the handset.
If the handset LCD screen prompts "Press base page 2s then press OK", long press
on the base station till the registration LED flashes. Then press the OK soft key on the
handset.
Shortcuts
This helps you get quick access to features by pressing the shortcut keys directly without
having to scroll through the menu.You can press the following predefined shortcuts to
access some frequently used features of your handset when the handset is idle:
Press
to access the call history.
Press
to check the line status.
Press
to place an internal call.
Press
to access the directory.
Press
to decrease the ringer volume.
Press
to increase the ringer volume.
3
on the base
Basic Operations
Turning Handset On/Off
To turn the handset on, do one of the following:
Long press
until the LCD screaen lights up.
Place the handset in the charger cradle. The handset will be turned on automatically.
To turn the handset off:
Long press
again to turn the handset off.
Locking/Unlocking Keypad
Long press
when the phone is idle to lock the keypad.
Long press
again when the phone is idle to unlock the keypad.
Switching Silent Mode On/Off
Long press
to switch the silent mode on.
Long press
again to switch the silent mode off.
Handset Settings
Handset N ame
To rename the handset:
1. Press the
OK
key to enter the main menu, and then select
2. Edit the value in the
Rename
field.
3. Press the
Save
soft key to accept the change.
Volume Adjustment
Press
or
during a call to adjust the volume of the currently used audio device.
Press
or
when the handset is idle to adjust the ringer volume.
Ring Tones
1. Press the
OK
key to enter the main menu, and then select
Melodies.
2. Press
or
to highlight the
Intercom Call
3. Press
or
to select the desired ring tone.
Save
4. Press the
soft key to accept the change.
Local Directory
To add a contact:
1. Press the
OK
key to enter the main menu, and then select
Options
2. Press the
soft key, and then select
3. Enter the desired values in the
Name
,
Number
4. Press the
Save
soft key to accept the change.
To edit a contact:
OK
1. Press the
key to enter the main menu, and then select
2. Press
or
to highlight the desired entry.
Settings
->
Handset Name.
Settings
->
Audio
->
Ring Tones
option or the desired line.
Directory.
New Contact.
and
Mobile
fields.
Directory.
->
4

Advertisement

loading

This manual is also suitable for:

W52h