Installation - Lencore Spectra i.Net Installation Manual

section 1

1.1 | installation

1.
Refer to the sound masking layout (drawing) provided to locate the appropriate
speaker installation position.
Secure speaker to wall using supplied bracket.
2.
Install Cat 5e cable with standard RJ45 connector into the speaker.
3.
1.2 | wiring
1. For first speaker connection to OP: Connect the audio cable– 8 conductor CAT5 from
OP channel to INPUT of speaker.
2. For speaker to speaker connection: Connect audio cable– 8 conductor from OUTPUT of previous
speaker to INPUT of next. Follow the same series connections to add up to 8 speakers per
channel. The last speaker in any channel will have only one cable going to its INPUT only. There
will be no cable connected to the output.
3