Control Setup - Laser Optronix LD200 User's Operation Manual

Laser Dome Camera LD200/400 PTZ
accumulation. (If the night is slow to focus, check the settings for the automatic.)
.1
SLOW SHUTTER: three options: automatic, shutter and slow gate. Slow shutter and
door series were 12 and 12. when under shutter and slow gate situation. once the
camera screen display is open, the monitor will display the frame rate of accumulation.
(If slow to focus in night, please check whether the settings is automatic.
gain only work in the laser opened.
.9 RETURN：return to the main menu.

.4 CONTROL SETUP

.4.1 HOME OPTION：Enter the submenu
of setting automatic return function.
.4.1.1AUTO HOME：When this item is "ON"
open the automatic return function.
It means that if the user has no action within
a period of time, the night vision will return to HOME.
When the night vision camera is in a state of patrol,
it will not return to HOME. When without the need to
return to HOME, please set this item in "OFF".
.4.1.2HOME POS：HOME is the return position. For example, when you need to setup
a scene as HOME, you should first adjust to this scene, setup the pre-setting
position as No.3, then move to the menu and enter this submenu; change the
number behind HOME POS into 3. This is OK. If you want to make the
automatic function take effect, donot forget to setup the AUTO HOME in "ON".
HOME POS can be pre-setting position 1-50.
.4.1.3DWELL TIME：Setup the automatic return time, which means how long it will
return to HOME without control. The time can be one minute to 99 minutes.
.4.1.4RETURN：return to the last menu.
.4.2 LASER LIGHT：Laser illuminator open item: normally, the system will
automatically inspect the outside lighting level, automatically open or close laser
illuminator; if the user changes this item into "ON", this system's laser control is
changed into manual. If you need to return to the automatic state, you must change
this laser menu into the state of "AUTO".
.2 BACK LIGHT: there are two operation options: open /
closed.
.3ICR SHOT: turn on manually, or automatically control.
.4D-ZOOM: set to turn on / off two states
.5WB SET: ATW / INDOOR / OUTDOOR / ONEPUSH /
AUTO / MANU
.6SSNR：Noise reduction options, there are three
models: low, medium and high.
.7EXP COMP VALUE: SET the range 1~16.
.8AGC: there is a total of 14 options Automatic gain,
ranging from 2dB to 28dB. Frame accumulation and
11
www.laseroptronix.se